Andrzej Janowski, European Segment Marketing Manager for safety equipment manufacturer MSA, offers best practice guidance for carrying out confined space works.
The MGS-402 dual-channel gas detection controller from Bacharach is designed for refrigerant, toxic and combustible gas detection applications.
Australian research into physical and chemical properties of nano diesel particles in an underground mine considers potential health effects on workers.
Emerson Rosemount 628 electrochemical toxic gas sensors now measure carbon monoxide (CO) and oxygen depletion (O2) in addition to hydrogen sulfide (H2S).
Gas detection instruments are lifesaving devices. It is essential that you choose the best product to meet your specific application and working environment.
The Ecotech AQMesh is a small sensor air quality monitoring device.
The CAC harsh-area gas sampling system is a custom-designed single- or multiple-channel sampling system.
A question and answer session with Greg Shires, Managing Director of CAC GAS & Instrumentation, about the importance of bump testing and calibration.
According to NIOSH, atmospheric hazards account for 40% of the deaths in confined spaces.
A gas leak in the WestConnex tunnel forced the evacuation of hundreds of construction workers on Monday.
The BW Gas Alert MicroClip 4-Gas Detector prevents harmful exposure to hazardous gases commonly encountered.
The Sensepoint XCL is an easy-to-use, wall-mounted gas detector that is designed to deliver safety, compliance and affordability.
The Odalog 7000 MkII is a portable multigas monitor for air quality measurement, logging or personal monitoring in car parks, loading areas and related zones.
The KELLER Series D piezoresistive OEM pressure transmitters are designed for applications in strongly hazardous areas of the gas group II (industry applications).
Workers in the NSW mining and extractives industry are advised that the Nautitech (NTMS) RapidSense Exia methane gas detection unit has been identified by the Resources Regulator as using a different housing to the unit that was tested and design registered.