Confined spaces > Gas detection

Calibration gas test stations

04 June, 2012

CAC Gas has introduced a line of bump test/calibration stations for use with gas detection instruments and gas analysers. The test stations range from manual systems to automated systems. The MGS and GFS Manual Series stations are designed to be used by technicians and service repair facilities. The BTS and BTS-HP Automated Series are easy-to-use, one-button test stations for field testing of portable gas detection instruments.

CAC Gas & Instrumentation BTS-HP Bump Test Stations for gas detection instruments

30 May, 2012

The BTS-HP Bump Test Stations are used with high-pressure/large-volume gas cylinders, providing a solution for bump testing/response testing gas detection instruments in mining applications. Workers can test their gas detection instruments quickly and efficiently by simply pushing the green button.

Draeger X-act 5000 automatic tube pump

25 May, 2012

The automatic tube pump Draeger X-act 5000 can be used to measure and sample gases, vapours and aerosols. An all-in-one solution, it is designed for measurements with the company’s short-term tubes and for sampling tubes and systems.

Dwyer Instruments Model 1205B handheld CO/CO2 gas analyser

21 March, 2012

The Model 1205B handheld CO/CO2 gas analyser accurately measures the concentration of carbon monoxide and carbon dioxide in a duct or space.

Draeger X-zone 5000 mobile gas detector

22 February, 2012

The Draeger X-zone 5000, in combination with the Draeger X-am 5000 or X-am 5600 gas detection instruments, can be used for the measurement of one to six gases.

Xtralis releases enhanced Vesda Eco gas detection device

04 February, 2012

An enhanced version of the Vesda Eco gas detection device from Xtralis is available. Eco is a gas detection extension for the Xtralis Vesda aspirating smoke detection (ASD) system that can detect alcohol, gasoline vapour, pentane, chlorine and carbon dioxide and also provide oxygen and ammonia sensing.

CAC Gas 10 L high-pressure cylinder

30 November, 2011 by

The CAC Gas 10 L high-pressure cylinder with gas capacity of 1500 L is a suitable alternative for users who are currently consuming multiple 58 L cylinders per year.

Remote control inspector for confined spaces

21 November, 2011

A confined spaces inspection robot eliminates risks for workers and reduces the costs associated with bridge maintenance.

CAC Gas PBR-100 push-button regulator

15 November, 2011 by

The PBR-100 push-button regulator is available in four different flow rates.

Ignition of gas leads to underground fire

15 November, 2011

An ignition of gas and a subsequent fire in the longwall goaf of an underground coal mine resulted in the evacuation of the underground workforce. An investigation into the cause of the ignition and the emergency response is continuing.

CAC Gas VAF-100 and VAF-100-HP regulators

19 October, 2011 by

The VAF-100 and VAF-100-HP regulators for use with either disposable or high-pressure calibration gas cylinders reduce the need for multiple regulators.

CAC Gas stainless steel ODFR-1001-HP

16 October, 2011

The CAC Gas stainless steel On Demand Flow Regulator (ODFR-1001-HP) can be used with instruments or docking stations with internal pumps.

Vision Safe Bottlechock cylinder restraint system

04 October, 2011 by

Bottlechock is a cylinder restraint system purpose designed to keep cylinders secure, protecting staff along with often valuable gauges and equipment. The clamp design allows a range of cylinders with different diameters to be held by the same clamp. The clamp grips around, maintaining full contact with the cylinder, to restrict both horizontal and vertical movement.

CAC Gas MGS (manual gas station)

30 September, 2011 by

Manufactured in Australia, the MGS (manual gas station) is suitable for calibration gas service facilities that are using a variety of different calibration gases.

Scott Safety Protégé Multi-gas Monitor

20 September, 2011 by

The Protégé Multi-gas Monitor can be used for the detection of oxygen, combustibles, hydrogen sulphide and/or carbon monoxide in industrial and fire applications in Australia and New Zealand.

  • All content Copyright © 2024 Westwick-Farrow Pty Ltd