Ventis MX4 multigas detector
31 March, 2011The Ventis MX4 multigas detector is a lightweight, highly configurable instrument that is available with or without an integral pump and is compatible with iNet Gas Detection as a Service.
CAC Gas 112DA 112 L calibration gas cylinder for combustion efficiency
18 March, 2011The 112DA 112 L calibration gas cylinder for combustion efficiency applications is available for combustion gases such as carbon monoxide, nitric oxide, nitrogen dioxide, sulphur dioxide, and oxygen.
CAC Gas calibration gas cylinders for the food storage/refrigerant industry
21 February, 2011 byCAC Gas has available a complete line of calibration gas cylinders manufactured specifically for the food storage and refrigerant industry.
Speed is important
10 February, 2011 byFew people stop to consider not only does a sensor respond, but how fast does it respond? The average walking speed for humans is 5 km per hour or 83 m per minute. Some gas detectors can take up to a minute or more to respond, that’s 80-odd meters later if you are walking into a hazard at normal pace. If not walking, it is up to a minute lost to take evasive action. Time is of the essence and evasive action taken sooner can and will prevent disaster.
Gas cylinder recycling program to assist Qld relief fund
17 January, 2011CAC Gas has introduced a new recycling program to provide an environmental solution for disposing of all empty non-refillable calibration gas cylinders.
MSA Trigard multigas fixed detector
23 December, 2010 byThe Trigard multigas fixed detector, suitable for use in confined spaces, mining, water and wastewater plants and general industry, allows users to monitor multiple gases at a single fixed point, simplifying installation and maintenance.
MSA 116 and 950 L high-pressure calibration gases
20 December, 2010 byMSA has released 116 and 950 L high-pressure calibration gases for the Altair 4X and Altair family. The MSA high-pressure cylinders provide gases characterised to suit the Altair family and provide lower costs for users. Using similar sized cylinders at higher pressures lowers carbon footprint per calibration through reduced production and waste costs.
CAC Gas calibration gas cylinders for gas detection
20 December, 2010CAC Gas supplies calibration gas cylinders for all gas detection applications. Single, two, three, four or five gas mixtures and various cylinder sizes are available to meet user requirements.
MSA Galaxy automated calibration and test station
20 December, 2010The Galaxy automated calibration and test station for the Altair 4X performs automated calibration and testing, record keeping and has networking capability.
MSA Altair 4X high-speed, multigas detector
13 December, 2010The Altair 4X high-speed, multigas detector is designed for use in confined spaces, mining, OGP and general industry.
CAC Gas 112 L cylinder
07 December, 2010 byThe CAC Gas 112 L cylinder reduces the user’s environmental footprint compared to the standard 58 L cylinder.
Choosing a gas detector - the seven rules
01 December, 2010In today’s regulated safety environment the need for reliable, effective gas detection has never been so important. New players have seen the opportunity to generate cash by jumping on the confined spaces bandwagon and making detectors, leaving consumers with a bewildering array of choice. So how do you choose?
CAC GAS line of high-pressure calibration gas cylinders
02 November, 2010 byCAC GAS has introduced a range of high-pressure calibration gas cylinders for users who have large numbers of instruments and who will benefit from the lower cost/litre of the larger volume cylinders.
Simtronics GD1 C02 open path toxic gas detector
28 September, 2010
by
The Simtronics GD1 C02 open path toxic gas detector, with laser-based line of sight, can be used for the detection of carbon dioxide (CO2) toxic gases.
CAC Gas 112 L calibration gas cylinder
22 September, 2010 byThe 112 L calibration gas cylinder for instrument calibration and function/bump test applications provides users with nearly double the volume of standard 58 L cylinder with no increase in cylinder size. Using the same regulator, the 112 L is a simple upgrade.
