Fluke 28 II Ex DMM digital multimeter for hazardous zones

28 May, 2012 | Supplied by: Fluke Australia Pty Ltd

Fluke Corporation has introduced the Fluke 28 II Ex DMM, a digital multimeter for measurements both inside and outside of hazardous zones. The device meets intrinsic safety (IS) standards worldwide (Qld pending) for safe use inside potentially explosive environments, making it suitable for use in petroleum, chemical and pharmaceutical facilities.

Weidmuller SIL 3 Safety Relay

25 May, 2012 | Supplied by: Weidmuller Pty Ltd

Electrical connectivity supplier Weidmuller has released its SIL 3 Safety Relay. Created specifically for use in the emergency shutdown of plants and plant components in the process industry, the device increases plant availability and safety.

9 safety tips for those working on electrical circuits in conduits

23 April, 2012

WorkCover NSW has issued a safety alert to remind electrical workers of the inherent dangers of cutting electrical conduits that are in service. These conduits may contain multiple circuits. This is in response to an incident where an electrical contractor received a fatal electric shock. The contractor was replacing a faulty lighting circuit that was located in an underground heavy-duty PVC conduit. He isolated the lighting circuit at the meter board and proceeded to carry out the repairs.

Allen-Bradley Guardmaster safety relays

30 March, 2012 | Supplied by: Rockwell Automation Australia

The line of Allen-Bradley Guardmaster safety relays features single-wire communication capability that helps eliminate the need for dual-channel connection between relays.

Cirlock UCL-PI, UCL-PO and UCL-POW lockout devices

28 March, 2012 | Supplied by: Cirlock

Cirlock has available a range of padlockable lockout devices that have been designed to fit most miniature circuit breakers with acceptable holes. These varieties are: the UCL-PI (pin in), the UCL-PO (pin out) and the UCL-POW (pin out wide).

Eaton SOL30-Safety fireman’s switch

27 March, 2012 | Supplied by: Eaton Industries Pty Ltd

The SOL30-Safety fireman’s switch offers maximum safety to firefighters where solar PV systems are installed.

Eaton POD surge protector range

26 March, 2012 | Supplied by: Eaton Industries Pty Ltd

Offering protection from surges and spikes, the Eaton POD range of powerboards is suitable for computers, home entertainment systems and other electronic equipment. It also protects against line noise that may affect sensitive equipment.

Phoenix Contact PSR-ESAM 4 safety relay

20 March, 2012 | Supplied by: Phoenix Contact Pty Ltd

The Phoenix Contact PSR-ESAM 4 safety relay, which has three safety switching paths and a signalling output, is used for two-channel monitoring of emergency stop control devices or safety door switches in machines and systems.

Bosbox 63A power distribution module

14 March, 2012 | Supplied by: BosBox Pty Ltd

Bosbox has released the tough 63A poly model as part of an expanded range of wall-mounted power distribution modules, suitable for workshop or generator sets.

Phoenix Contact PSR-ESAM 4 safety relay

06 February, 2012 | Supplied by: Phoenix Contact Pty Ltd

Phoenix Contact has extended its range of safety relays with units for various supply voltages. The relays are suitable for a range of applications.

Pilz Australia Industrial PLIDdys safe line inspection device

10 October, 2011 | Supplied by: Pilz Australia Industrial Automation LP

The PLIDdys safe line inspection device provides a safe power-up on two-wire connections, providing safety on long cable routes of up to three kilometres. The device allows unintended power-up or plant start-up to be excluded in the event of an error. This is particularly beneficial on interlinked plants or on plant sections distributed over a wide area, which may not always be clearly visible. The compact design means that existing plants can easily be retrofitted.

Hager B&R One Module Add-on Block

06 October, 2011 | Supplied by: Hager Electro Pty Ltd

The One Module Add-on Block provides three-phase earth leakage protection and reduces installation time and the panelboard size, thus combining the essential elements of modular design and functionality.

Schneider Electric Quick PRD surge protector

06 October, 2011 | Supplied by: Schneider Electric

The Quick PRD surge protector provides protection against induced or conducted surges resulting from indirect lighting strikes. The product features remote end-of-life signalling and requires limited maintenance. It is simple to install with an easy-to-earth terminal and it can be installed directly into the switchboard frame.

Mayo Hardware S31 safety padlocks

03 October, 2011 | Supplied by: Mayo Hardware Australia

The S31 safety padlocks have a durable non-conductive Xenoy lock body and a 4.76 mm marine-grade 316 stainless steel shackle. The padlocks are available in nine colours and are lightweight, making them easy to carry. They also perform in extreme conditions, with a temperature rating range of -46 to 177°C and the ability to withstand harsh chemicals and corrosion.

Diodes AP9050 protection interface

08 August, 2011 | Supplied by: Arrow Electronics Australia Pty Ltd

The AP9050 from Diodes is a dedicated protection interface designed to guard the latest generation of power management ICs against overvoltages.

  • All content Copyright © 2020 Westwick-Farrow Pty Ltd