Pizzato LK S lockout device for NS series safety switches

Friday, 07 February, 2020 | Supplied by: Leuze electronic Pty Ltd



The Pizzato NS series of safety switches provide PL3 and SIL3 safety levels by installing one device on the machine, thereby facilitating fast installation. The LK S lockout device for the safety switches is made of metal and attached laterally to the holes on the NS device, without an auxiliary fixing plate or support.

The red sliding gate on the lockout device mechanically closes the actuator entry hole and functions as a shield for the RFID receiver antenna on the NS switch. This provides an additional level of protection against accidental closure of the guard and untimely restart. This is suitable for machines with an installed low-level coded actuator, making any attempt to bypass the switch impossible. When the door is raised a ring emerges on the top of the device, allowing insertion of up to five padlocks.

The shape of the sliding plate allows the lockout device to be used on both hinged and sliding guards, and on both left and right sides. The specific version of the device must be ordered for left- or right-hand-sided installation.

Online: www.leuze.com.au
Phone: 1300 538 933
Related Products

SciTech Serstech Arx+ handheld Raman spectrometer

The Serstech Arx+ handheld Raman spectrometer is designed to provide accurate measurements and...

Emerson Rosemount solids level switches

Emerson's Rosemount solids level switches are designed to provide users with a flexible level...

Bacharach Monoxor XR High CO Analyser

The Monoxor XR is a portable exhaust gas analyser, designed to measure CO from combustion engines...


  • All content Copyright © 2020 Westwick-Farrow Pty Ltd