Electrical safety analyser
18 November, 2008
The ESA620 electrical safety analyser has a selection of three test loads, two protective earth test currents and two insulation test voltages to perform all primary electrical safety tests as well as several additional leakage tests for premium standards compliance worldwide.
Thermal imagers
18 November, 2008
The TiR1 and TiR thermal imagers are designed for use in building restoration and inspection applications.
Pipe-mounted sensor
18 November, 2008 | Parker (Aust) Pty Ltd
Parker Instrumentation has launched ball and needle instrumentation valves optimised for high-pressure fluid control applications operating at up to 1379 bar. The valves meet the needs of high-pressure hydraulic control and other demanding instrumentation applications that are increasingly being faced in the offshore oil and gas sector.
Flammability analyser
18 November, 2008
The PrevEx flammability analyser provides lower flammable limit monitoring for measuring flammable gases, vapours and mixtures of multiple solvents, in low oxygen, elevated temperature and inert atmospheres.
Sensor catalogue
18 November, 2008
Banner Engineering’s Sensor Products 2008–2009 catalogue showcases industrial product lines, which include photoelectric and special-purpose sensors as well as measurement and inspection sensors.
Infrared cameras
18 November, 2008
FLIR Systems has added two camera models to its T-series, a compact handheld infrared camera range for industrial and technical applications.
Modular calibration system
18 November, 2008
The Advanced Modular Calibration System from GE Sensing & Inspection Technologies is a handheld test and calibration system that combines an advanced, multifunction calibrator with pressure measurement and generation capability. Its modular concept allows its discrete components to be used as standalone instruments, allowing significant flexibility both in cost of ownership and in functionality.
Thermal imager
18 November, 2008
The PTI-160 series cameras offer an optimal price/performance ratio. Equipped with an integrated high-performance UFPA detector, they are quickly ready for use and deliver sharp, accurate thermal images for on-site problem analysis.
Tester calibration service
18 November, 2008
The Farnell calibration service for test and measurement instruments provides services including initial calibration for new products, NATA accredited calibration and to check the accuracy of existing test equipment.
Proximity sensors
18 November, 2008
Infra International manufactures a range of inductive proximity sensors designed to fit a wide range of industrial sensing applications. All Infra proximity sensors are designed, built and quality tested in house at its factory in Italy.
Electric transport
18 November, 2008
Varley Electric Vehicles provide fume-free operation, reliability, quietness and simple maintenance.
Mobile radio system
18 November, 2008
Icom has released IDAS (Icom Digital Advanced System), a series of digital land mobile radios.
Series for high load motion control applications
18 November, 2008
The Kerk VHD series anti-backlash assembly provides the maximum load-carrying capability and the highest axial and radial stiffness of any Kerk nut assembly.
Silencer
18 November, 2008
The Mini and Midi Coax Silencers have been designed to lower sound level when using the Coax cartridges for direct integration or when using them on the Vacuum Gripper Systems VGS or the pump unit PMAT/Vactrap platforms.
Defibrillator analyser
18 November, 2008
The Impulse 6000D defibrillator analyser and Impulse 7000DP defibrillator/transcutaneous pacer analyser test systems are rugged, portable precision test instruments that ensure proper operation and ultimate performance of critical life-support cardiac-resuscitation equipment.
