Proximity sensors
18 November, 2008
Infra International manufactures a range of inductive proximity sensors designed to fit a wide range of industrial sensing applications. All Infra proximity sensors are designed, built and quality tested in house at its factory in Italy.
Electric transport
18 November, 2008
Varley Electric Vehicles provide fume-free operation, reliability, quietness and simple maintenance.
Mobile radio system
18 November, 2008
Icom has released IDAS (Icom Digital Advanced System), a series of digital land mobile radios.
Series for high load motion control applications
18 November, 2008
The Kerk VHD series anti-backlash assembly provides the maximum load-carrying capability and the highest axial and radial stiffness of any Kerk nut assembly.
Silencer
18 November, 2008
The Mini and Midi Coax Silencers have been designed to lower sound level when using the Coax cartridges for direct integration or when using them on the Vacuum Gripper Systems VGS or the pump unit PMAT/Vactrap platforms.
Defibrillator analyser
18 November, 2008
The Impulse 6000D defibrillator analyser and Impulse 7000DP defibrillator/transcutaneous pacer analyser test systems are rugged, portable precision test instruments that ensure proper operation and ultimate performance of critical life-support cardiac-resuscitation equipment.
Monitoring relays
18 November, 2008
The latest-generation PMDsigma relays monitor voltage, current, temperature and phase sequence, while enabling values to be set via a rotary knob and saved onto a chip card so they can be copied onto other units.
Vibration switch
18 November, 2008
Hawk has released the Gladiator vibration switch series, a heavy-duty point level device.
Embeddable presence sensors
18 November, 2008
The Banner Engineering M-GAGE wireless sensor node for vehicle sensing is encapsulated in an IP67-rated enclosure and accompanied by a long-lasting FlexPower battery, which supplies power for both sensing and wireless connectivity for up to 10 years.
Universal power alert
18 November, 2008
The UPA-130 universal power alert is designed to reduce the risk of electrical arc flash by pre-verifying the electrical isolation from the outside of a control panel. The device is hard wired to the circuit breaker or main disconnect and flashes whenever voltage is present. It is engineered with redundant circuitry, which allows it to be powered by the same voltage that it indicates.
Linde Materials Handling FleetFocus vehicle management system
13 November, 2008 | Linde Materials Handling
FleetFocus is a vehicle management system that allows site activities to be better monitored and thereby improve materials handling safety.
Opacity monitor
13 November, 2008 | Air Met Scientific Pty Ltd
The DynOptic Systems SM-202 opacity monitor is a dust particle and smoke monitoring system designed for use in industrial applications.
Noise canceller for sound sleep
13 November, 2008 | Vision Safe
The 980A sound screen utilises white noise to create a barrier of sound while people sleep. The sound generated effectively blocks noise in the surrounding environment and can assist in making it easier for people to sleep, particularly useful in remote industrial sites where sleeping is made difficult because of close living confines or where noise is constant.
Suspended power board
13 November, 2008 | Jackson Industries
The PT1199SS ‘Power on a Chain’ power board is designed to provide electrical power to work areas via overhead means, removing the hazards of tripping or electrocution from electrical leads strewn across floors.
Antistatic step platforms
13 November, 2008 | Fluidminds Pty Ltd
The Branach anti-static step platform ladder was developed for the electric utility market to enable personnel to safely work at heights when maintaining high-voltage substations. Key design guidelines for the ladder were electrical safety, solid construction and convenience of use.
