Machine

Call for entries to SA safety awards

04 August, 2006

SafeWork SA is calling for entries into the Safe Work Awards for 2006.


Standards Australia to continue as peak standards body

26 July, 2006

Standards Australia funding will continue at current or increased levels if recommendations from a draft report are followed that suggest it remain Australia’s peak standards development organisation.


The standard is set for machine safety

25 July, 2006

The new standard for the safety of machinery has finally been published.


A safety system that will not negatively effect production

14 June, 2006 | Supplied by: Fluidsentry

A common complaint of today's machinery safeguarding requirements is their potential impact on production


Mezzanine safety system

12 June, 2006 | Supplied by: http://www.ozgrandson.com

The Mezgate unit incorporates a sliding panel which secures the opening in the mezzanine railing, a fixed fence which generally is permanently fixed at right angles to the front railing, a hinged pair of panels and a locking system which ensures total security.


SA safety crisis

12 May, 2006

The Quins munitions plant explosion near Gladstone has prompted SA Unions to call for an urgent overhaul of workplace safety standards in South Australia.


Multivariable transmitter

11 May, 2006 | Supplied by: Emerson Automation Solutions

Emerson Process Management has released the Rosemount Analytical Model Xmt two-wire transmitter for liquid analysis.


High temperature lubricant

12 April, 2006 | Supplied by: ITW Polymers & Fluids

Rocol High Temp Synthetic Chain Lube, a high temperature lubricant, has been specially formulated to lubricate chains exposed to temperatures as high as 280°C. With conventional graphite/water mix chain lubricants, precious production time is lost as the lubricant cannot be applied to the chain unless it is below 100°C. As the lube can be applied at temperatures of up to 280°C, ovens do not need to be shut down.


Monitored pneumatic safety valves

12 April, 2006 | Supplied by: Fluidsentry

Directional control valves for pneumatic safety applications in five-port two-position sliding spool type with static seals, mounted on a safety manifold configured for three-port two-position operation.


Sensors provide answers in emergencies

11 April, 2006

An earthquake strikes a large city, wrecking roads and bridges, stranding rush-hour commuters, trapping office workers inside high-rise buildings.


Pressure sensors

15 March, 2006 | Supplied by: Micromax Pty Ltd

Turck has introduced high accuracy PS400 and PS500 programmable pressure sensors with switchpoint accuracy of ±0.5%.


Biometric access device

15 March, 2006 | Supplied by: Fujitsu Australia

Fujitsu has launched its contactless palm vein device for biometric authentication security, PalmSecure.


Carlo Gavazzi monitoring relays

13 February, 2006 | Supplied by: NHP Electrical Engineering Products Pty Ltd

Carlo Gavazzi monitoring relays incorporate over and undervoltage, to protect the motors that keep an operation running. The current feature ensures overload protection while phase loss sequence ensures the correct rotation for generators and many more protection applications.


Ioniser

13 February, 2006 | Supplied by: SMC Australia | New Zealand

SMC Pneumatics claims to have solved static elimination applications with the introduction of the IZS30 series ioniser.


PSENcode safety switch

18 January, 2006 | Supplied by: Pilz Australia Industrial Automation LP

A non-contact coded safety switch, PSENcode, from Pilz is claimed to meet the highest requirements for safety gate monitoring, the highest level of security and 10 units can be connected in a single series.


  • All content Copyright © 2019 Westwick-Farrow Pty Ltd