As part of the growing range of lockout tagout safety equipment, the Cirlock SOKIT ROKIT is used to protect those working with extension leads outdoors/underground.
The Cirlock Isolator Bar Lockout Kit is a lockout device designed specifically for isolator switches and motor control centres.
Contractor lockout kits have been put together especially for commercial tradespeople and contractors working on various sites.
The Cirlock contractor lockout kits have been put together especially for commercial tradespeople and contractors working on various sites.
Cirlock was contacted by Lend Lease to provide the Cirlock permanently mounted Lockout System on the Sunshine Coast Hospital project.
The NHP ISO Appliance Inlets range is designed to complement the existing range of ISO Plugs and Sockets.
Emona Instruments has released the PAC3760 DL data logging appliance tester and test tag printing kit.
The Fluke ClirVu CV Series IR Windows provide protection for inspectors of high-energy equipment.
The Times Protect LP-BTR high performance surge arrestor series addresses applications in the 200-1000 MHz spectrum. The DC blocking technology employed in this design provides optimum isolation of the antenna port from the protected equipment port for maximum surge protection.
Quint DC/DC converter power supplies equipped with selective fuse breaking can be used in hazardous zones and in shipbuilding. The converters trip circuit breakers reliably. Faulty circuits are selectively shut down so that the fault is localised and important system components remain operational.
The SIL 3 Safety Relay is created specifically for use in the emergency shutdown of plants and plant components in the process industry. The device meets the requirements of EN61508 as well as the safety demands of Safety Integrity Level 3.
igumid ESD has been designed for applications where there are any electrostatic discharges that are potentially damaging, for instance manufacturing or handling of sensitive electronic products and component parts.
Electrical connectivity supplier Weidmuller has released its SIL 3 Safety Relay. Created specifically for use in the emergency shutdown of plants and plant components in the process industry, the device increases plant availability and safety.
WorkCover NSW has issued a safety alert to remind electrical workers of the inherent dangers of cutting electrical conduits that are in service. These conduits may contain multiple circuits. This is in response to an incident where an electrical contractor received a fatal electric shock. The contractor was replacing a faulty lighting circuit that was located in an underground heavy-duty PVC conduit. He isolated the lighting circuit at the meter board and proceeded to carry out the repairs.
Cirlock has available a range of padlockable lockout devices that have been designed to fit most miniature circuit breakers with acceptable holes. These varieties are: the UCL-PI (pin in), the UCL-PO (pin out) and the UCL-POW (pin out wide).