Chainmesh PPE
09 June, 2009 | Honeywell Industrial Safety
The Sperian Protection chainmesh range includes gloves, aprons and tunics made from high-quality stainless steel to strict ISO 9002 safety standards.
Safety tools
09 June, 2009 | R.A Venn Pty Ltd
The EgaMaster 1000 V insulated tools are tested to 10,000 V and tested for heat resistance, adhesion, penetration and impact, making them suitable for a wide range of trades and applications.
Emergency kit
09 June, 2009 | Extreme Safety
Designed in conjunction with the Department of Emergency Services in Queensland, the Disaster Supply Kit is designed to contain everything an average small workplace needs in the event of an emergency where power and water may be cut off.
Gas cylinder lockers
09 June, 2009 | PBA Safety
The No Rust system provides a solution for safely securing LPG and compressed gas cylinders.
Modular vehicle lights
09 June, 2009 | Vision Safe
The Acot500 Assassin mine vehicle light bar is IP66 rated and designed for the harsh terrain and conditions found on mine sites.
Safety analysis software
09 June, 2009 | B-Safe Australia
JSAfe is portable software application that helps users to create and manage job safety analyses (JSAs) across a large corporate network or at a single job site.
Welding voltage reducer
09 June, 2009 | Wesgard International Pty Ltd
The WES400AC-DC welding voltage reducer is a low-voltage safety device designed to operate on any constant current welding machine (stick welder) with an open-circuit voltage of 45-100 V, maintaining the output voltage under 12 V until the arc is struck, thereby preventing the operator from receiving an electric shock.
Risk management solution
09 June, 2009 | Risk Management & Safety Systems Pty Ltd
The latest version of risk management software RMSS Suite incorporates four modules: Riskmanager, Compliancemanager, Incidentmanager and Claimsmanager.
Intrinsically safe power supply
09 June, 2009 | Endress+Hauser Australia Pty Ltd
The RN221N combined active barrier and power supply is SIL2 rated and provides galvanic isolation for the 4 to 20 mA measured signal. It is suitable for use in hazardous areas and can be powered by 20 to 250 VAC/DC, reducing the need for different versions across the plant.
Fall arrest bolt tester
09 June, 2009 | TechRentals
The Hilti Tester 4 is an inspection system to test safety bolts and fall arrest bolts on building exteriors. These bolts need to be tested when installed and every year after in order to comply with OHS requirements outlined in building regulations and Australian Standards AS 189.4-2000 and AS 4488.201997.
Roof access walkway system
09 June, 2009 | Kattsafe
The On-Trak Walkway System, with its ease of installation, lightweight construction and non-slip surface, provides a maintenance-free solution to roof access and safety walkways for commercial and industrial roofs.
Emergency hose reels
09 June, 2009 | Reel Tech Pty Ltd
The Hannay Rescue Series hose reels help users to respond to emergencies quickly, safely and efficiently. The series features the F1500, C1600 and the F2000 hose reel models.
Edge management system
09 June, 2009 | Ferno Australia
The Arachnipod is a total edge management system based around the concept of an industrial tripod; however, the modular design enables components to be added or removed as required, creating a truly multifunctional system.
Load turner
09 June, 2009 | Materials Handling Pty Ltd
Pal-turn Load Rotator makes the often difficult and dangerous task of turning and rotating heavy or bulky loads safer and easier.
Hands-free hydration system
09 June, 2009 | Protector Alsafe
The Hi-Viz Watermaster hydration pack from Camelbak is a hands-free hydration system that allows workers to rehydrate without taking their hands off the job.
