Personal protection equipment > Respiratory protection

3M Versaflo respirator systems

30 October, 2012

The Versaflo Respirator Systems from 3M are designed to protect workers in a wide range of industries and applications, helping them work comfortably for long periods. The product range has three modules - an air delivery unit, a headtop and a breathing tube - that can be combined into dozens of configurations to deal with changing environments, hazards and comfort preferences.


3M Reusable Respiratory Protection Guide

23 October, 2012

3M has published a Reusable Respiratory Protection Guide that provides users with a better understanding of the cartridges and filters they use with their 3M re-usable respirator(s).


3M Half Face Organic Vapour Respirator 4000 Series

26 September, 2012

The 4000 Series Respirators are ready-to-use, maintenance-free half-masks designed for effective and comfortable protection against a combination of many gases, vapours and particulate hazards found throughout industry.


Sundström SR584 welding cartridge

24 September, 2012

The Sundström SR584 welding cartridge can be mounted on the SR580 helmet with visor and provides not only head and respiratory protection but also protects the eyes and face when welding.


BOC PAFtec CleanSpace powered respirator

18 September, 2012

BOC has released the small and light powered respirator, the PAFtec CleanSpace.


3M Select and Service Life Software software

11 September, 2012

3M’s Select and Service Life Software software is available for complimentary download on its website. The software can be used to assist in the selection of respirators as well as determining their service requirements.


3M 9300 series respirator

04 September, 2012

The three-panel design and ultrasoft inner cover web allows the 3M 9300 series respirator to comfortably mould to the face and accommodate facial movements without compromising the fit.


Eight steps to reduce dust in the workplace

31 August, 2012

With no Australian standards in place for dust management in the workplace, Hilti has provided steps to keep worksite dust under control.


Respirator fit testing is essential for worker safety

08 August, 2012

Conducting a fit test to ensure that a respirator with a tight-fitting facepiece provides an adequate seal to the wearer’s face is deemed best practice as part of a respiratory protection program.


Honeywell 3000 half-mask respirator

25 July, 2012

The user-friendly Honeywell 3000 half-mask respirator with a P2/P3 filter is suitable for use in environments where mould poses a threat.


Scott Safety Modulair airline trolley system

19 June, 2012

The Modulair airline trolley system is designed to provide portable clean air in restricted access areas. The stainless steel hose reel unit (hose up to 105 m) and cylinder frame can be used independently or together.


Scott Safety Flite airline breathing apparatus

18 June, 2012

The Flite is a breath-activated, positive-pressure airline breathing apparatus with the option of a hip-mounted 10 or 15 min compressed air cylinder supply.


Scott Safety Protector Promask Twin full-face respirator ReadyPak

13 June, 2012

The Protector Promask Twin full-face respirator ReadyPak is available complete with full-face respirator and a pair of R1 filters conveniently packaged in a resealable storage container. The storage container provides protection for the respirator and filters. Certified to AS/NZS 1716:2012, the ReadyPak is available with a choice of three filters: particulate (P3), spray painting (A2P3) or chemical (A1B1E1K1P3).


Sundström SR700 powered air-purifying respirator

31 May, 2012

A slimmed-down version of Sundström’s powered air-purifying respirator (PAPR) is now available. The SR700 model has the same air delivery capabilities as its bigger counterpart, the SR500, but is designed for protection against particles only. It is suitable for any situation where filter protection against hazardous particles or nuisance dust is required or recommended.


Air-purifying respirators

01 May, 2012

The fundamental goal of any respiratory protection program is to control occupational diseases caused by breathing air contaminated with harmful dusts, fogs, fumes, mists, gases, smokes, sprays and/or vapours.


  • All content Copyright © 2025 Westwick-Farrow Pty Ltd