Frontal fall arrest harness
25 January, 2007 | 3M Fall Protection
The AB119/2AU harness has been created by Protecta in response to market demand for a frontal attachment point to the recently-released tower workers harness.
Portable multi-gas monitor
25 January, 2007 | Wormald
The Scout is a tough and simple-to-use multi-gas monitor that measures and displays toxic gases, oxygen and combustible gas concentrations simultaneously. These measurements are possible through selection from a wide range of interchangeable (plug-and-play) smart sensors.
Hybrid hazardous location headlamp
25 January, 2007 | Spelean Pty Ltd
The Petzl Duo ATEX L5 headlamp is designed for use in the presence of gases, vapours and mists with a self-ignition temperature of more than 200°C at atmospheric pressure.
Pilz Safety controller
25 January, 2007 | Pilz Australia Industrial Automation LP
The Pilz PNOZmulti modular safety controller offers a good level of diagnostics via the front-panel LEDs and the facility for connecting a laptop PC via a serial port.
GasBadge Pro personal gas monitor
25 January, 2007 | Industrial Scientific Corporation
The 'dockable' GasBadge Pro single gas monitor is now available with a low hydrogen (H2) interference carbon monoxide (CO) sensor option.
Wheel stop
25 January, 2007 | Pall Mall Manufacturing Co
The PM Wheel Stop is made of black solid rubber with an easy-see yellow reflector for night-time identification. It is designed to be placed in parking spaces to prevent vehicles from overrunning the allocated area.
New Pig spill kits
13 December, 2006 | iQSafety
The New Pig kit range includes the Universal Kits, Haz-Mat Kits and the Oil-Only Kits. The kits have no loose absorbents and are constructed to deploy products as they are required for emergency spill response. Kits also have additional mats on top for small incidental spills, so the user will not need to empty the whole kit or reach to the bottom to find products for absorbing small spills.
Air balance hoist
13 December, 2006 | Schmalz Australia Pty Ltd
The Millsom Air Balance Hoist and Power-Free Rail system provides control for the handling of heavy materials in manufacturing and component assembly operations.
Self-retracting lifelines
13 December, 2006 | 3M Fall Protection
The Protecta JRG self-retracting galvanised cable lifelines AD216FI (16 m) and AD232FI (32 m) are lightweight, compact and durable in design. Constructed from shock-resistant thermo plastic housing and stainless steel corrosion-resistant, zinc-coated internal components. The 4.0 mm diameter wire rope offers protection to heat and wear.
Portable/personal lights
13 December, 2006 | Vision Safe
Where low light conditions, traffic flow difficulties and emergencies require quick and effective management, Vision Safe's range of Signal Lites is an option.
Earth leakage clamp
13 December, 2006 | CABAC
The T2007B earth leakage clamp meter has been designed to meet the IEC1010-1 and IEC1010-2-0.2 standard.
Overpack salvage drum
13 December, 2006 | Enware Australia Pty Ltd
Combined overpack and salvage drums that comply with international standards for the handling, storage and transporting of hazardous materials are being introduced by Enware.
Safety step
13 December, 2006 | Team Systems (Vic) Pty Ltd
The Step-up is a plastic safety step that is designed so that the structural top deck is reinforced with the addition of kiss offs to maintain a solid flat deck surface.
Breathing air cylinder charge station
13 December, 2006 | Wormald
RevolveAir is a unit which allows for simultaneous charging of breathing air cylinders (BAC) within the protective chamber while two further BACs are being exchanged outside the chamber.
Hose holder
13 December, 2006 | Tooltechnic Systems (Aust) Pty Ltd
The CT-SG hose holder is for all CT mobile dust extractors. It enables tidiness and cleanliness in the workshop at the customer's premises and during transportation.
