Switchboard inspection window
20 March, 2008 | Teledyne FLIR
The Hawk IR Sightglass is a 75 mm diameter inspection window fitted to the door or inspection cover of electrical equipment enclosures. For the safe visual and thermal inspection of internal electrical components without the need to open any enclosure.
Retractable fall protection system
20 March, 2008 | 3M Fall Protection
The EZ-Line retractable horizontal lifeline system eases the stress of installing, recoiling and removing temporary horizontal lifeline systems by incorporating a built-in retractor device. The entire 18 m system is easily deployed and retracted from its compact, hand-held housing. The system also reduces the burden on wearers by weighing in 33% lighter than most horizontal lifeline systems.
Electrical safety testers
20 March, 2008 | Westek Electronics Pty Ltd
Extech has released two products designed to simplify data processing of electrical safety testing measurements. The Extech Opt.758 ethernet card and Opt.751 multifunction USB card both slot into the Extech 7742 safety tester which provides dielectric strength, insulation resistance, earth continuity and leakage testing, thus facilitating data exchange and control of testing protocols.
Honeywell Safety Products Tower harness
20 March, 2008 | Honeywell Industrial Safety
The Revolution tower harness comes with a rear dorsal dee ring with 300 mm extension for fall arrest attachment, along with frontal fall arrest attachment, confined space loops and pelvic dee rings for work positioning.
Security camera
20 March, 2008 | Fork-Safe International
The Fork-Cam is an industrial CCTV system that was designed from the outset for use in heavy industrial applications.
Efficient emergency lighting
20 March, 2008 | Legrand Australia P/L
The Slide Connect G2 is designed to use up to 70% less energy than a conventional fluorescent emergency and exit lighting system. Designed and manufactured in Australia, the lighting fixture uses a single high brightness LED, which is 'under run' in normal conditions to conserve energy and extend lamp life, but operates at full brightness in emergency situations.
Tubeless safety relief valves
21 February, 2008 | Pressure Systems Aust Pty Ltd
Pressure Systems has introduced the F7000/8000 IM series of pilot operated safety relief valves, with integral module construction. No tubing is required to activate the valve and relieve the system pressure.
Signal isolator
21 February, 2008 | Innovec Controls Pty Ltd
The ISCX1 is a signal isolator that accepts a 4-20 mA with an input impedance of 50W, or 0-10 VDC with an input impedance of 1 MW and provides an isolated output signal of 4-20 mA or 0-10 VDC with an accuracy of 0.1%.
Forklift safety system
21 February, 2008 | Hi-Vis
The Fork-Alert warning system is an electronic early warning system designed for use where forklifts, cranes and other moving equipment are used.
Pipe fittings
21 February, 2008 | Philmac Pty Ltd
Philmac has released a range of pipe fittings with improved durability and unique safety features, specifically for the mining industry.
Half face respirator
21 February, 2008 | Safety Equipment Australia Pty Ltd
The Sundström SR100 silicone half-face respirator is designed for heavy-duty work during extended periods in industrial applications.
Disposable ear plugs
21 February, 2008 | Moldex
The Moldex Pura Fit earplugs are designed with a longer length for easier fitting into the ear and tapered for easy insertion in any size ear canal.
Industrial gloves
21 February, 2008 | Lynn River Ltd
The Showa Re-Grip gloves are designed for industrial applications such as freight handling, construction, agriculture, waste collection, recycling assembly and glass handling.
Asbestos removal supervisors' course
21 February, 2008 | TAFE NSW
TAFE NSW has developed a WorkCover NSW recognised four-hour program Bonded Asbestos - Nominated Supervisors Course for people who supervise teams in the bonded asbestos removal areas.
Drum-mixing system
21 February, 2008 | Actisafe
Actidrum is a sturdy, industrial strength product to aid in the mixing of contents in drums of all sizes, safely and efficiently. It can be manufactured to operate in a fixed position or supplied with long-wearing castors to those seeking a mobile version.
