Machine > Control systems

Increasing sustainable production with safety

19 April, 2010 by

The global imperative for companies to operate in a socially responsible manner is driving the interest in sustainable production. Here, a key area that can influence success is safety. Marcia Walker, Program Manager, Rockwell Automation and Dan Hornbeck, Safety Market Development Manager, take a closer look.


Distributed control provides plug-and-play safety functionality

22 March, 2010 by Ralf Möbus*

Distributed processing architectures provide machine builders with more flexibility in meeting clients' operational and safety requirements.


Allen-Bradley Kinetix 6200 servo drive

18 March, 2010 by

The Allen-Bradley Kinetix 6200 servo drive has advanced safety features that help protect personnel and improve production efficiency. These include safe stop, zero speed monitoring, safe direction monitoring and safe maximum acceleration monitoring.


Pilz PNOZ s30 safety relay

17 March, 2010 by

Part of the PNOZsigma safety relays range, the PNOZ s30 safety relay monitors safe standstill, speed and direction of rotation enabling safe working practices with the safety gate open, reduced set-up times and rapid access to the machine once standstill is initiated.


Festo MS6-SV air preparation range

17 March, 2010 by

The Festo MS6-SV air preparation range gives users a certified unit that can be integrated into new or existing circuits, either stand-alone or housed in an air preparation module. As a supply device providing a safe exhaust function, it offers a large number of possible applications and benefits.


Pilz PSENsgate secure safety gate monitoring system

16 March, 2010 by

The Pilz PSENsgate system for secure safety gate monitoring is a combination of electronics and mechanics, enabling the highest category to be achieved using a single system.


McCain incurs another health and safety breach

23 February, 2010

McCain Foods has been fined $145,000 following an incident where a worker's thumb was amputated while he was working on a machine that was not properly isolated.


Allen-Bradley Kinetix 6200 servo drive

03 February, 2010

The Allen-Bradley Kinetix 6200 servo drive has advanced safety features that help protect personnel and improve production efficiency. These include safe stop, zero speed monitoring, safe direction monitoring and safe maximum acceleration monitoring.


Festo MS6-SV soft-start/exhaust valve

29 January, 2010

The MS safety valve series features the MS6-SV soft-start/exhaust valve that complies with AS 4024 Category 4 and ISO 13849-1 Performance Level ‘e’.


ABB Breaker Lock added to Fortress switchgear interlocks

28 January, 2010 by

The ABB Breaker Lock has been added to the existing Fortress range of switchgear interlocks and forms an essential part of a sequential interlocking system that ensures the safe operation of electrical switchgear.


Fortress amGard key switch Option Pod

15 January, 2010

An Option Pod with a key switch has been introduced to the amGard range of modular safety gate switches.


Wieland samos PRO safety controller

14 January, 2010 by

The Wieland samos PRO is a compact safety controller for machine and plant applications. Utilising 22.5 mm-wide modules, a programmable safety system can be constructed from a total width of just 45 mm.


Internal safety release

12 November, 2009 by

The Internal Release (IR) adapter for the Fortress Interlocks amGard range of modular safety gate switches provides an internal release function for safety and access key installations.


Transmitters for safety instrumented systems

23 September, 2009 by

The Rosemount 5300 Guided Wave Radar (GWR) level transmitters for SIL 2 safety instrumented systems are equipped with a Failure Modes, Effects and Diagnostic Analysis report for use in the oil and gas production, refining, petrochemical, chemical and power industries.


Safety access control unit

23 September, 2009 by

The Eichner MGB (multifunctional gate box) is an interlocking guard system for safety doors on machines and systems. Linked to machine controls, the opening of access doors via the unit is prevented until the machine has safely stopped.


  • All content Copyright © 2024 Westwick-Farrow Pty Ltd