Confined spaces

Gas detection docking station

18 September, 2009 | Supplied by: Honeywell Industrial Safety

Compatible with the Biosystems Multi Pro range of gas detection units, the Multi Pro IQ Express Docking Station is fully automated and features automatic instrument identification.


CAC Gas & Instrumentation gas manifolds

18 September, 2009 | Supplied by: CAC Gas & Instrumentation

The CAC Gas & Instrumentation gas manifolds and changeover systems provide an engineered solution for gas calibration applications.


FLIR Infrared cameras

18 September, 2009 | Supplied by: Teledyne FLIR

The second generation of GF-Series infrared cameras, previously known as GasFindIR has been released.


Hazardous gas monitor

07 August, 2009 | Supplied by: Thermo Fisher Scientific

The OdaLog H2S Logger was developed specifically to measure concentration levels of hazardous hydrogen sulphide gas (H2S) for the odour-management requirements of the wastewater industry, primarily at or close to the source of H2S emissions, such as within sewerage pumping stations and receiving manholes.


MX4 gas detector

20 July, 2009 | Supplied by: Industrial Scientific Corporation

The MX4 gas detector is small, rugged and simple to use. It’s a suitable personal monitor to use in conjunction with the iNet program.


Truck driver killed by toxic fumes

30 June, 2009

A truck driver lost his life when a plastic kettle melted and set fire to the cab of his prime mover.


Docking stations for gas analysers

18 June, 2009 | Supplied by: Honeywell Industrial Safety

The Biosystems Toxi Pro/Toxi Ltd IQ Express docking stations are compatible with the Toxi Ltd and the Toxi Pro gas analysers respectively.


Intrinsically safe power supply

09 June, 2009 | Supplied by: Endress+Hauser Australia Pty Ltd

The RN221N combined active barrier and power supply is SIL2 rated and provides galvanic isolation for the 4 to 20 mA measured signal. It is suitable for use in hazardous areas and can be powered by 20 to 250 VAC/DC, reducing the need for different versions across the plant.


Multigas detector

09 June, 2009 | Supplied by: BW Technologies Australia

The GasAlertMicro 5 PID can simultaneously monitor and display up to five potential atmospheric hazards.


Honeywell PHD6 multigas detector

09 June, 2009 | Supplied by: Honeywell Industrial Safety

The Biosystems PHD6 multigas detector features: five sensor ports; up to six channels of detection; and 18 sensor options, including electrochemical, LEL, PID and infrared sensors.


GasFindIR LW thermal imaging camera

09 June, 2009 | Supplied by: Teledyne FLIR

The GasFindIR LW camera is capable of imaging ‘fugitive’ greenhouse gases such as SF6 and NH3. The camera’s rapid scanning capabilities provide real-time thermal images of gas leaks.


Multi gas detector

21 May, 2009 | Supplied by: http://www.sperianprotection.com.au

Featuring 5 sensor ports, up to 6 channels of detection and 18 sensor options including electrochemical, LEL, PID and Infrared, the PHD6 is suitable for just about any type of gas monitoring situation.


Fire engineer advocates using lifts in emergencies

04 February, 2009

Contrary to traditional OHS views regarding emergency evacuations, a fire engineer advocates the value of using lifts as well as stairs in the evacuation of a building.


Single gas monitor

01 January, 2009 | Supplied by: Air Met Scientific Pty Ltd

GasBadge Plus is a maintenance-free, single gas monitor with a two-year lifespan, designed for personal protection from unsafe levels of carbon monoxide, hydrogen sulfide, oxygen, nitrogen dioxide or sulfur dioxide.


PHD6 multigas detector

01 January, 2009 | Supplied by: Honeywell Industrial Safety

The Biosystems PHD6 multigas detector features: five sensor ports; up to six channels of detection; and 18 sensor options, including electrochemical, LEL, PID and infrared sensors.


  • All content Copyright © 2025 Westwick-Farrow Pty Ltd