Weidmuller SIL 3 Safety Relay
12 June, 2012 | Weidmuller Pty LtdThe SIL 3 Safety Relay is created specifically for use in the emergency shutdown of plants and plant components in the process industry. The device meets the requirements of EN61508 as well as the safety demands of Safety Integrity Level 3.
Earth Wrap non-slip floor and wall labels
12 June, 2012 | Total PrintThe Earth Wrap non-slip floor and wall label allows users to personalise their signage with corporate slogans or logos. This enhances their message and helps them promote their corporate ideals at no extra printing cost. This reinforces their commitment to their staff to provide as safe a workplace as is possible.
Crossgrip walkway matting
12 June, 2012 | Plastic ExtrudersCrossgrip walkway matting is designed as a safe and easily loose-laid solution for rooftops, gantries and high-level walkways. It provides a slip-resistant surface and protects the roof membrane. Due to its flexible construction, the matting will contour over uneven surfaces and imperfections and provide a permanent and safe walkway for service staff and wheeled equipment.
Quint DC/DC converter power supply range
12 June, 2012 | Phoenix Contact Pty LtdQuint DC/DC converter power supplies equipped with selective fuse breaking can be used in hazardous zones and in shipbuilding. The converters trip circuit breakers reliably. Faulty circuits are selectively shut down so that the fault is localised and important system components remain operational.
Tyco Model EC-25 Extended Coverage Sprinkler
12 June, 2012 | WormaldThe Model EC-25 Extended Coverage Sprinkler, from Tyco Fire Protection Products (TFPP), provides advanced solutions for the higher-density, extended-coverage applications in extra hazard and storage occupancies.
NHP Safety Reference Guide
09 June, 2012 | NHP Electrical Engineering Products Pty LtdThe free guide comes complete with technical information on the company’s extensive range of safety products, white papers on various safety applications and information documents on international/local safety standards.
Toyota 8FBN series electric forklifts
09 June, 2012 | Toyota Material Handling Australia Pty LtdToyota Material Handling Australia (TMHA) has launched its 8FBN range of four-wheel, counter-balance, battery electric forklifts. The 8FBN series consists of five models, ranging from 1.5 to 3 tonne rated capacity at 500 mm load centres, with a choice of masts, hydraulic controls and attachments.
Crown CDV180S-7 18-tonne lift truck
08 June, 2012 | Crown Equipment Pty LtdThe Crown CDV180S-7 18-tonne lift truck is claimed to offer more power than any other comparable IC vehicle. With a 1200 cm load centre, the CDV180S-7 delivers high levels of capability and capacity. The lift truck has a Tier 3 electronic control 254 HP 7.6l diesel engine that provides high torque at low revs, reduces fuel consumption and meets or exceeds current environmental requirements.
FMCG Industry Solutions dirt capturing system
08 June, 2012 | FMCG Industry SolutionsThe Foreign Matter Capturing System actively captures metal, glass, sand, soil and dust fragments from tyres and boots every time they travel over FMCG Industry Solutions’ Profilgate system. Areas protected include entrances into and out of warehouses, production areas, processing areas, maintenance departments and other high-risk areas, reducing the risk of product contamination and potential recalls.
Specsavers Certified Prescription Safety Eyewear
07 June, 2012 | Specsavers Pty LtdSpecsavers has increased its range of AS/NZS 1337.6:2012 Certified Prescription Safety Eyewear.
CAC Gas FF-100 SM septum regulator
07 June, 2012 | CAC Gas & InstrumentationThe FF-100 SM septum regulator is designed for applications where customers are required to inject gas samples into GCs or other gas analysers. The regulator provides the connection for taking samples with a gas syringe.
Adept Technology s1700D robot
07 June, 2012 | Adept Technology International LtdAdept Technology has introduced the Adept Viper s1700D, a 6-axis robot designed for material handling, machine tending, packaging, cutting and assembly. The s1700D robot features Adept ACE software, which deploys the robot through a user-friendly interface.
3M launches new website
07 June, 2012 | 3M Safety & Graphics3M’s Occupational Health & Environmental Safety Division has launched its new Australian website The site’s online product catalogue enables visitors to quickly find information on disposable and re-usable respirators, earplugs and earmuffs, protective coveralls, welding helmets and communication headsets and more.
Salisbury insulated tool range
05 June, 2012 | Honeywell Industrial SafetyThe non-sparking and non-magnetic insulated tools and tool kits from Salisbury include wrenches, pliers, cutters, screwdrivers, sockets and tool kits, which can be used within environments where hazardous, flammable or combustible vapours, liquids, dusts or residues may be present.
Narda Safety Test Solutions Selective Radiation Meter SRM-3006 with LTE option
04 June, 2012 | Narda Safety Test Solutions GmbHNarda Safety Test Solutions has equipped its Selective Radiation Meter SRM-3006 frequency selective field measuring instrument with an LTE option (which can be retrofitted to older instruments).
