Do's and don'ts of hard hat accessorising
ProChoice Safety Gear outlines some do’s and don’ts of hard hat accessorising in this five-point guide.
If you need to wear a hard hat for work, your accessories could be putting you at risk of an injury by reducing the effectiveness of your PPE. As well as their compliance with Australian standards, hard hats and other PPE rely on an adequate user fit to protect the wearer. Any additional accessories or clothing which affect fit could reduce the hard hat’s ability to keep you safe.
This also applies to wearing other PPE with hard hats, such as safety glasses, and highlights the importance of choosing appropriate equipment for the task and user, including testing the fit of PPE together beforehand. But while you should not ever leave off necessary PPE, when it comes to other add-ons, how do you decide if it is safe to wear granny’s knitted beanie under your hard hat?
First and foremost, always follow the manufacturer’s instructions. If the manufacturer says don’t do it… don’t do it. But where they have not specified if something is allowable, you will have to conduct your own risk assessment. To help you out, we have put together a quick five-point guide with some hard hat accessory do’s and don’ts.
1. No pom-poms
If your granny’s beanie has a pom-pom, then it’s out. The same goes for turbans, sombreros, high ponytails (not an accessory, but still worth mentioning) and anything else which gives your hard hat too much extra lift. Unfortunately, all these kinds of headwear make the hard hat unstable, increasing the likelihood of it sitting incorrectly on your head and failing to adequately protect you in an accident.
In short: if the added accessory does not sit smoothly against your head, then it is not a good idea to wear it.
2. No caps… or metal
While they sit closer to your head, most baseball caps come with a metal stud or button on the top which could prove dangerous. In the event of an impact, the metal button could be driven into your skull, causing an injury that would not otherwise have occurred. Additionally, if the face visor of the cap is curved, it may prevent the hard hat from being fitted correctly.
In short: avoiding caps (and any metal) under your hard hat is definitely the way to go.
3. Sun and sweat protection is OK
While caps are out, cotton/polyester or plastic visors, brims and flaps which attach to the helmet are all a great solution to staying sun safe throughout summer. Make sure you read the manufacturer’s instructions to ensure that you are using them correctly and with the right type of hard hat. And if you want to use a soft sweat band to keep the sweat out of your eyes, that will typically fit easily with a hard hat as well.
4. Straps and lamps
Adding a strap or lamp to your hard hat could improve your safety; however, make sure to fit these accessories correctly. It is always best to buy your hard hat and these types of accessories from the same manufacturer to ensure a better fit, rather than mixing different brands.
5. Choose winter liners and flat-top beanies
Winter liners — a balaclava-style headwear — and flat-top beanies are generally appropriate to wear under hard hats, although you should conduct a fit test yourself. As long as they are close-fitting, are without any metal pieces and do not obstruct the fit or stability of the hard hat, then they can keep your head warm all through winter. However, always remember to conduct a fit test before starting the job.
You can view ProChoice Safety Gear’s hard hat accessories here.
Here are some tips on selecting the right work boots, particularly for the growing number of...
The Queensland Government's free, mandatory lung health checks and reduced mine dust limits...
The welding workplace poses many hazards; however, if safety measures and appropriate personal...