Safety light screen

Friday, 18 September, 2009 | Supplied by: Micromax Pty Ltd


The Banner Engineering EZ-Screen safety light screen range has been expanded to include low-profile models, for small light screens - such as safeguarding smaller machines.

The first and last beams are positioned at the ends of the light screen, delivering continuous detection along the entire light screen and eliminating the dead zones found on traditional safety light curtains.

The system is available as 14- or 25-mm resolution models, 270-1810 mm defined areas, up to 7 m detection ranges and in anodised aluminium or safety-yellow, powder-coat housings, with nickel-plated housing optionally available for ESD-safe applications.

Mounting brackets are supplied for end or side mounting with no dead zone.

The system features 8 ms response times, two 500 mA solid-state safety outputs, a user-configurable 250 mA auxiliary output, flexible wiring to allow emitters and receivers to be used interchangeably and cascading. The interconnection of cascade sensors has been optimised with no large cable loops, allowing up to four sensor pairs and an E-Stop or interlocking guard switches to be connected.

Applications include small assembly equipment, pick-and-place machines, power and moulding presses, palletisers, packaging machinery, roll formers and automated production equipment.

Online: www.micromax.com.au
Phone: 02 4223 7600
Related Products

Emerson DeltaV automation platform

The Emerson DeltaV automation platform features supervisory control and data acquisition (SCADA)...

FleetSafe Proxicam AI pedestrian detection system

The FleetSafe Proxicam AI pedestrian detection system has been designed to prevent injuries and...

Incident Zero Laser Safety Halo exclusion zone for mobile plant

The Incident Zero Laser Safety Halo is a low-powered red laser light that delineates a distinct...


  • All content Copyright © 2024 Westwick-Farrow Pty Ltd