PULS 24 VDC 15 A Buffer Units from Control Logic

Monday, 26 May, 2014 | Supplied by: Control Logic Pty Ltd

PULS has released the UC10.241 and UC10.242 DC buffer modules. They extend the buffer times currently offered by the UF20.241 and UF20.481 by using Electrochemical Double Layer Capacitors (EDLC) which can provide a back-up time of up to 33 s for a 10 A load.

Some of the key features of these modules are good operational lifetime expectancy and, unlike with DC UPS systems which use batteries, no cabinet ventilation is required. With a short charging time compared to that of batteries, the units are rapidly back in ready mode following a discharge.

They also maintain a regulated output voltage in buffer mode of 22.5 V, are capable of providing full output power between -40 and +60°C and with quick-release spring clamp terminals, wiring is quick and easy.

Other features include an inhibit digital input that when activated turns off the output, buffering and ready relay outputs to provide unit status back to a control system.

Online: www.controllogic.com.au
Phone: 1800 557 705
Related Products

Pilz PSENini inductive safety sensors

Pilz PSENini inductive safety switches detect the approach of metallic objects without contact...

Mitsubishi Electric MELSEC iQ-R Series CIP Safety Module

The MELSEC iQ-R Series CIP Safety Module occupies a dual slot on an iQ-R PLC rack and is...

Wieland Electric E-Stop actuators

LAPP Australia's range of Wieland Electric E-Stop actuators can be used on a wide range of...

  • All content Copyright © 2024 Westwick-Farrow Pty Ltd