Schmersal SLC440COM series safety light curtains and SLG440COM series safety light grids
The compact Schmersal SLC440COM series safety light curtains and SLG440COM series safety light grids incorporate highly visible status signalling in a rugged housing.
The profile length corresponds to the protective field height to allow for optimal installation with the application.
Operating status can be seen from a distance. The end cap of the receiver unit is moulded from a semitransparent plastic that is illuminated by LED, showing green for proper operation and red when the protected field has been interrupted, or flashing red to indicate fault conditions.
Like Schmersal’s other Type 4 safety light curtains, the SLC440COM series features a one-piece extruded, reinforced housing in a compact 28 x 33 mm rectangular profile. This housing profile is claimed to be less susceptible to mechanical damage and misalignment from torsion or bending.
The safety light curtains are used for the protection of hazardous areas and are available with resolutions of 14, 30 or 35 mm and protection field heights between 330 and 1770 mm; also available as safety light grids (SLG440COM) with 2, 3 or 4 beams for perimeter guarding. Both series are suitable for use in safety circuits up to PLe (EN 13849) or SIL3 (IEC 61508).
Phone: 1800 557 705
Capital Safety Rollgliss Rope-Safe Rope Grab secondary back-up device for fall arrest
Designed for use as a secondary back-up device for fall arrest on kernmantle rope, the Rope-Safe...
Technique Solutions Python Quick Wrap tape and D-Rings attachment points
The Python D-Ring attachment points are used together with Python Quick Wrap tape and Heat Shrink...
Exair NEMA 12 cabinet cooler systems
The Exair small NEMA 12 cabinet cooler systems keep electrical enclosures cool with -7°C air...
