Machine safety guarding

Sunday, 26 October, 2003 | Supplied by: CPR Safe-Ind



Cleervue machine guards suit a wide range of drilling, milling and grinding machines as well as lathes.

The standard BT model drilling guards have been upgraded and are now more robust and suitable for a tough environment. The main clear sections are injection moulded in polycarbonate making them particularly strong, especially necessary in educational and production environments where they are often mistreated.

The operator's view of the drilling process is good. All models have adjustable depth stops enabling the bottom section to be adjusted to suit the drill bit length. This lower section also concertinas on contact with the workpiece. For drill changing, the guard pivots up towards the operator and is held in this position by over centre springs.

Typically, the guards are attached to the drilling machine's non-rotating quill and guards with the most common diameters are stocked and unusual sizes may be ordered.

Online: www.cprsafe.com.au
Phone: 08 8556 1166
Related Products

Capital Safety Rollgliss Rope-Safe Rope Grab secondary back-up device for fall arrest

Designed for use as a secondary back-up device for fall arrest on kernmantle rope, the Rope-Safe...

Technique Solutions Python Quick Wrap tape and D-Rings attachment points

The Python D-Ring attachment points are used together with Python Quick Wrap tape and Heat Shrink...

Exair NEMA 12 cabinet cooler systems

The Exair small NEMA 12 cabinet cooler systems keep electrical enclosures cool with -7°C air...


  • All content Copyright © 2021 Westwick-Farrow Pty Ltd