Flame-retardant and firefighting work wear

Sunday, 13 March, 2005 | Supplied by: http://www.shcc.com.au/

The S&H Protex range of flame-retardant work wear and certified firefighting garments is designed for comfort, protection and functionality.

The Industrial flame-retardant work wear provides a solution to workplace safety requirements where the potential for exposure to heat or flame is present. While standard work wear may catch alight, the flame-retardant garments will self-extinguish on removal from the flame source. There is no prolonged burning, therefore reducing the potential for serious burn injury.

The Firefighter garments are fully certified to AS 4967 (Structural) and AS 4824 (Wildland) Standards. Needing to perform under extreme conditions, the Product Certification program provides the user with independent third party assurance that these garments are in compliance with these Standards.

Related Products

Capital Safety Rollgliss Rope-Safe Rope Grab secondary back-up device for fall arrest

Designed for use as a secondary back-up device for fall arrest on kernmantle rope, the Rope-Safe...

Technique Solutions Python Quick Wrap tape and D-Rings attachment points

The Python D-Ring attachment points are used together with Python Quick Wrap tape and Heat Shrink...

Exair NEMA 12 cabinet cooler systems

The Exair small NEMA 12 cabinet cooler systems keep electrical enclosures cool with -7°C air...

  • All content Copyright © 2024 Westwick-Farrow Pty Ltd