ITW Finishing Technologies MPV supplied air respirators

The MPV supplied air respirators can be used when clean compressed air from a source outside the contaminated area is needed.

Air passes through an airline to the face piece or hood, with the continuous flow creating increased pressure inside. This pressure cools the user’s face and reduces fogging. The user’s airways and face, neck and head areas are protected.

The MPV full-face, air-fed visor provides comfort and good freedom of movement for the refinisher. Breathable air is gently and quietly dispersed through the tough, lightweight visor at a positive pressure, without misting or discomfort. The wraparound visor provides good vision, even spectacles can be worn underneath, while the ratchet headband adjustment is fast and convenient.

The crown strap is adjustable and the visor has a flip-up, nod-down facility. The integral visor includes a ‘face seal cassette’ available in foam or soft paper that quickly and easily clips to the rigid visor moulding. Clear view tear-off strips are available, as are replacement screens.

The MPV Integral visor outfit includes all the necessary components to provide both breathing and spraying air by connecting a single air supply line to the waist belt filter regulator, which contains a replaceable activated carbon cartridge for effective odour filtration and has a colour change indicator for oil contamination.

All DeVilbiss respirators are CE certified and independently tested and approved to Australian Standards. Assigned protection factor for the MPV-623 is 40 (the full-face visor is suitable for spraying with isocyanates).

Please note that all respiratory equipment must be supplied with air filtered to 0.01 microns using a coalescing filter such as the DeVilbiss DVFR 2.