Industrial safety helmet

Thursday, 13 November, 2008 | Supplied by: Australian Supreme Import

The HammerHead safety helmet is certified to AS/NZS 1801 as a Type 1 industrial on-site safety helmet and can be used in conjunction with on-site safety visors and mesh screens, providing simultaneous face protection. A visor holder locks the visors and mesh screens onto the helmet, while the chin strap enhances head protection.

The helmet features an alignment comfort pad and sweat band for all-day use, a pin-lock mechanism that adjusts for head circumferences from 53 to 66 cm, 30 mm slots to suit most cap-attached earmuffs and a sturdy 6-point nylon harness connected to the ABS helmet shell.

The helmet is available in white, yellow, green, red, blue, orange and neon yellow. Such a wide variety of colours enables people to be easily identified on a worksite, eg, contractors compared to employees, high-risk zone to low-risk zones. It can also be custom printed or have decals affixed to the front or sides of the helmet.


Phone: 08 9208 7288
Related Products

Blundstone #325 safety boot

The Blundstone #325 safety boot features a stone nubuck upper and an antibacterial comfort...

E2S AlertAlight and Sonora signalling devices

The AlertAlight and Sonora signalling devices are designed to provide effective alarm...

Kenzen smart PPE heat-monitoring system

Kenzen's smart PPE system for monitoring workers' heat risk can now track the heat...

  • All content Copyright © 2022 Westwick-Farrow Pty Ltd