Dematic Colby Rear Upright Protect-a-Rack racking protection

Tuesday, 03 February, 2015 | Supplied by: Dematic Pty Ltd


Dematic has launched a Colby Rear Upright Protect-a-Rack which is designed to enhance safety levels in Australian and New Zealand warehouses and distribution centres.

The rear upright protector builds on Colby’s existing Protect-a-Rack, which protects the front side of storage racking uprights by eliminating any catch points as pallets are being placed into or retrieved from the storage system, and deflecting any forklift impact forces.

The rear upright protection was added following reports from customers that although their front uprights bear the brunt of most damage, they were still experiencing damage to rear uprights. This damage was most commonly due to forklift drivers pushing a pallet too far into the ground level storage bay, causing it to strike the rear upright.

The system is now capable of fully protecting racking from front to back.

Online: www.dematic.com.au
Phone: 02 9486 5555
Related Products

Emerson Micro Motion G-Series Coriolis flow and density meter

The Micro Motion G-Series Coriolis flow and density meter from Emerson is suitable for chemical...

Martor 9947 Connector Set for safety knives and telescopic pole

The 9947 Connector Set from Martor includes the connector, which can be easily connected to...

Adept Direct FRAS magnetic cable hangers

The magnetic cable hangers are easy to install, even in harsh environments. They come with a...


  • All content Copyright © 2024 Westwick-Farrow Pty Ltd