Amco U-Tred PRO grate cleats

The U-Tred Pro Composite anti slip stairway cleats are made from fully composite polymer and feature the exclusively made Nano555 Higher-Viz Green colour. This shade of green is designed to cut through the traditional safety yellow ‘white noise’ that is common on industrial sites. The anti-slip stairway cleats are suitable for sites with slippery stairs or walkways.

When looking down a stairway or Gridmesh, or other metal grating, it can be difficult to determine where the leading edge of each tread is and where it starts and stops. With a clear line defining the edge of grating, the U-Tred PRO grate cleats are designed to stand out.

The offset lug pattern on the top surface is a feature that was not previously incorporated into the design. Behind each lug, the top of the tread is sloped so that when any mud on the top dries, it slides back off the tread, leaving the lug exposed and ready for use. The lugs maintain the aggressive profile, but are angled back, slightly towards the centre. This is to stop people who drag their feet when they walk from getting their boots caught in the tread.

The U-Tred PRO incorporates the same self-locking non-return barbs as the traditional U-Tred. The barbs clip under the bottom of the mesh when installed, meaning they can’t be removed and won’t wriggle loose.

As the U-Tred PRO grating cleat is made from a composite polymer, it can also be used on offshore oil rigs and other marine platforms where metal-on-metal contact is to be avoided. The composite construction also means they cannot rust.