CAC Gas & Instrumentation Ergonomic Cylinder Lift
The Ergonomic Cylinder Lift is a handcart that can move cylinders without lifting or rolling the cylinder. Just clamp, tilt and cart away. Once the cylinder is in the desired place, tilt the cylinder back using one hand and roll the cart forward to place the cylinder on the surface. Lift the cylinder by the cap to the desired height and unload.
ECL-8: Equipped with 8″ no-flat tyres, front swivel castors with brake on right front, fixed rear castors. A bracket range for cylinders 9 to 9.75″, up to 270 lb maximum working weight. Solid steel body design, single galvanised rising bracket shaft. Components are steel, rubber, galvanised and no-lead powder coat.
Brackets for cylinders and tanks to 12″ can be ordered for the ECL-8; however, it is recommended that an operator use an accessory leverage handle with any cylinder or tank above 10.25″ OD.
ECL-8-M16: The ECL-8-M16 option replaces the rear 8″ castors on model ECL-8 with a steel axel and rear 16″ no-flat tyres. The M16 is recommended if operators are moving cylinders over gravel, snow or other rough terrain.
For more information: https://www.cacgas.com.au/ergonomic-cylinder-lifts-ecl.
Phone: 1300 222 427
The 9947 Connector Set from Martor includes the connector, which can be easily connected to...
The magnetic cable hangers are easy to install, even in harsh environments. They come with a...
The EZ Align laser alignment tool features a powerful green laser line, to allow a single user to...