Transmitters for safety instrumented systems

Wednesday, 23 September, 2009 | Supplied by: Emerson


The Rosemount 5300 Guided Wave Radar (GWR) level transmitters for SIL 2 safety instrumented systems are equipped with a Failure Modes, Effects and Diagnostic Analysis report for use in the oil and gas production, refining, petrochemical, chemical and power industries.

The device is a 2-wire GWR for level and interface measurements on liquids, slurries and solids. It is intended to improve plant profitability through reliability, safety features and unlimited connectivity.

An enhanced capability to handle disturbing factors, longer measuring range and lower dielectrics, even with a single probe, has been built into the unit. Its robust design prevents leakage and performs reliably, especially under extreme process conditions. Heavy-duty probes are available to meet the extreme temperatures and pressure challenges with multiple layer of protection and advanced echo logics for reliable overfill detection.

The 2-wire technology enables fast installation. With user-friendly graphical interfaces and wizards, measure-and-learn functionality, suggestions for application-specific configuration and PlantWeb digital architecture functionality, the transmitter integrates into new or existing control systems.

Online: www.emerson.com/au/automation
Phone: 03 9721 0200
Related Products

OndoSense apex Level Line radar sensor

The OndoSense apex Level Line radar sensor is designed to enable high-precision and fast level...

MSA Safety FieldServer ProtoNode Gateway

The MSA Safety FieldServer ProtoNode Gateway provides remote monitoring capabilities via cloud...

Technofast EziJac hydraulic tensioners

Technofast's compact multipurpose EziJac tensioners are designed to reduce complexity while...


  • All content Copyright © 2026 Westwick-Farrow Pty Ltd