Spray Nozzle Engineering Click and Dry spray dry nozzle

Monday, 19 May, 2014 | Supplied by: Spray Nozzle Engineering


The Click and Dry spray dry nozzle now has an improved sealing system. The sealing system uses an axial face-to-face seal that provides higher pressure-handling ability than the conventional radial seals which are limited due to the gap that exists in the plug-and-socket system. This combined with a cap design which meets internationally recognised piping code compliance improves safety.

The Click and Dry design was a finalist at the Fonterra 2013 Vendor awards in the ‘Excellence in supporting product development in dairy’ category. The product was recognised for reducing scorched particles, which could result in a potential drier fire.

Online: www.sprayingsolutions.com.au
Phone: 03 9583 2368
Related Products

Pilz PSENini inductive safety sensors

Pilz PSENini inductive safety switches detect the approach of metallic objects without contact...

Mitsubishi Electric MELSEC iQ-R Series CIP Safety Module

The MELSEC iQ-R Series CIP Safety Module occupies a dual slot on an iQ-R PLC rack and is...

Wieland Electric E-Stop actuators

LAPP Australia's range of Wieland Electric E-Stop actuators can be used on a wide range of...


  • All content Copyright © 2024 Westwick-Farrow Pty Ltd