Series for high load motion control applications

Tuesday, 18 November, 2008


The Kerk VHD series anti-backlash assembly provides the maximum load-carrying capability and the highest axial and radial stiffness of any Kerk nut assembly.

Designed for smooth, quiet operation and long life, the assembly provides low drag torque by making use of the Kerk Axial Take-up Mechanism, creating a stiff spacer which will continually expand to accommodate the wear which occurs during use.

The self-lubricating series is also instrumental in combating environmental and noise reduction challenges, as encountered in the packaging industry. The VHD screw does not require grease to operate and therefore reduces noise and dust in the workplace.

Accuracy, reliability and load rating make the series a good replacement for ball screws.

Leads are available from 1.27 to 92 mm and lengths up to 4 m. The series screws are 303 stainless steel, with Kerk’s Kerkote TFE extended life coating optional. Assemblies are available cut to length or with screws machined to user requirements.

 

Related Products

Pilz PSENini inductive safety sensors

Pilz PSENini inductive safety switches detect the approach of metallic objects without contact...

Mitsubishi Electric MELSEC iQ-R Series CIP Safety Module

The MELSEC iQ-R Series CIP Safety Module occupies a dual slot on an iQ-R PLC rack and is...

Wieland Electric E-Stop actuators

LAPP Australia's range of Wieland Electric E-Stop actuators can be used on a wide range of...


  • All content Copyright © 2024 Westwick-Farrow Pty Ltd