Safety network controller

Sunday, 13 November, 2005 | Supplied by: Omron Electronics Pty Ltd


The safety network controller (SNC) is a safety controller with a built-in DeviceNet safety interface. The SNC also features modularly con-figured safety functions for programming safety circuits. The controller meets SIL3 of IEC61508, the standard for funct-ional safety, and machine safety standard, category 4 of EN954-1.

The SNC's three main features include programmable safety control circuits, added flexibility for system expansion via networking and the ability to share wiring with machine control systems.

The SNC reduces wiring normally associated with conventional large-scale complex systems. In fact, Omron expects wiring requirements slashed by as much as 50%, helping to minimise wiring error during installation or maintenance work and lifting operability during system changes.

Online: www.omron.com.au
Phone: 02 9878 6377
Related Products

Incident Zero Laser Safety Halo exclusion zone for mobile plant

The Incident Zero Laser Safety Halo is a low-powered red laser light that delineates a distinct...

Toyota Second-Gen EV 79 Series-based ZED70 Ti LandCruiser

The second generation zero-emissions ZED70 Ti is a tough, light electric commercial vehicle...

Dematic automated guided vehicles (AGVs)

Dematic has launched a range of freezer-rated automated guided vehicles (AGVs), featuring...


  • All content Copyright © 2024 Westwick-Farrow Pty Ltd