Noshok orifices and snubbers

Thursday, 28 July, 2011 | Supplied by: AMS Instrumentation & Calibration Pty Ltd


Noshok’s orifices and snubbers help protect valuable instrumentation from pulsation and pressure spikes by restricting the flow of rapidly increasing and decreasing pressures.

The press-fit brass orifices or threaded 316 stainless steel orifices are available on all Noshok pressure gauges and most Noshok transducers. They are standard with a 0.012 or 0.032 ID, depending on the model. These orifices don’t take up space as they are inserted inside the NPT. Noshok’s piston type snubbers resist clogging and are self-cleaning. They are supplied with five different-sized pistons to ensure the correct amount of snubbing for virtually every application. They are available in brass and 316 stainless steel in 1/4 NPT, 1/2 NPT or 7/16-20 SAE-4. The sintered snubbers increase gauge readability by smoothing out pressure surges, pulsations and spikes, and eliminate instrument failure due to pressure shock. Snubbing action is achieved by utilising a corrosion-resistant 316 stainless steel sintered disc, which is held in place by way of a 316 stainless steel set screw.

Online: www.ams-ic.com.au
Phone: 03 9017 8225
Related Products

Incident Zero Laser Safety Halo exclusion zone for mobile plant

The Incident Zero Laser Safety Halo is a low-powered red laser light that delineates a distinct...

Toyota Second-Gen EV 79 Series-based ZED70 Ti LandCruiser

The second generation zero-emissions ZED70 Ti is a tough, light electric commercial vehicle...

Dematic automated guided vehicles (AGVs)

Dematic has launched a range of freezer-rated automated guided vehicles (AGVs), featuring...


  • All content Copyright © 2024 Westwick-Farrow Pty Ltd