The range of Mineflags from On Site Safety is available in both LED and non-LED models.
All Mineflags are pre-sewn with a 285 x 265 mm mesh flag with a 50 mm wide reflective silver cross, applied to both sides of the mesh flag, ensuring a fully visible vehicle.
The Mineflags are available in a variety of lengths (1200, 1800, 2400 and 3000 mm).
All Mineflags poles are constructed with a solid yet flexible fibreglass material with a 13 mm diameter for streamlining and lower air drag. They are built to survive off-road vibrations and the harsh outback conditions.
The range of accessories includes a spring base and a splitter/joiner for the longer models. A quick-release buckle is provided for all non-LED models.
Using high-intensity, 12-24 V, variable DC LEDs that emit a bright spray of light, the custom built and designed LED is claimed to outshine traditional super-bright LEDs. The pulsating red flashing pattern can be seen at a full 360°, both horizontally and vertically with visibility over 1.5 km at night.
The Mineflags from On Site Safety are suitable for mine vehicles, construction sites, off-road buggies, 4WD enthusiasts and just about anywhere that you need to be seen day or night.
All the LED mineflags are C Tick compliant to ensure no interference with communications equipment.
Phone: 08 9208 7288
Aurion clean-tech machining solution
The Aurion clean-tech machining solution uses ionised air as an alternative for metal working...
i-team co-botic 45 robotic scrubber-dryer
The i-team co-botic 45 robotic scrubber-dryer is designed for almost all hard floor types and can...
Emerson DeltaV automation platform
The Emerson DeltaV automation platform features supervisory control and data acquisition (SCADA)...