Novaris IS range of surge and lightning protection

Monday, 14 January, 2019 | Supplied by: Control Logic Pty Ltd



The Novaris IS range of surge and lightning protection products is designed specifically for hazardous areas. The products are certified intrinsically safe according to IEC Ex and ATEX; the group IIC T4 certification makes it acceptable for use with all gas/air mixtures.

These slimline surge protection devices (SPDs) provide surge protection for most twisted pair signalling schemes. The SPDs can be installed in the hazardous zone or the field side of the IS barrier. This not only provides protection for the PLC or RTU I/O, it also provides protection for the IS barrier.

With two different base options the SL protectors offer either direct earthing via DIN rail, for the most effective, low impedance earth connection (-G base), or a connection via GDT to the DIN rail, offering isolation under normal conditions and equipotential bonding during a surge (-EC90 base).

The plug-in design provides simple and rapid replacement and testing with no rewiring needed. This also provides a convenient method of field equipment isolation if required.

Online: www.controllogic.com.au
Phone: 1800 557 705
Related Products

Emerson Rosemount solids level switches

Emerson's Rosemount solids level switches are designed to provide users with a flexible level...

Pizzato LK S lockout device for NS series safety switches

The NS series of safety switches from Pizzato provide PL3 and SIL3 safety levels and can be used...

Bacharach Monoxor XR High CO Analyser

The Monoxor XR is a portable exhaust gas analyser, designed to measure CO from combustion engines...


  • All content Copyright © 2020 Westwick-Farrow Pty Ltd