Protect-Air ToolReg In-line Air Regulator
Factory set to prevent pressure changes, the ToolReg In-line Air Regulator is designed to be fully tamper-proof and ensure that only the required pressure is used for each individual pneumatic tool. The automatic secondary pressure relief releases all the residual pressure in the pneumatic tool to prevent unexpected activation (common in nail guns and staplers).
Compressed air is expensive to generate as there is a lot of energy (electrical and mechanical) involved in producing it. Higher compressed air pressures require far more energy to produce. On average, the air compressor requires 1% more energy for every 0.15 bar increase in compressed air pressure.
Each pneumatic tool is designed to perform best at a given pressure. Operating the tool at a higher pressure not only reduces the performance but also shortens the possible lifecycle of the tool.
The ToolReg is an economical investment for energy efficiency. It optimises performance and lengthens the lifespan of the tool, as well as preventing loss of production time due to the damaged tool being out for repairs.
For more information: https://www.caasafety.com.au/products/toolreg/.
Phone: 08 8983 3999
The Serstech Arx+ handheld Raman spectrometer is designed to provide accurate measurements and...
Emerson's Rosemount solids level switches are designed to provide users with a flexible level...
The NS series of safety switches from Pizzato provide PL3 and SIL3 safety levels and can be used...