Intrinsically safe power supply
The RN221N combined active barrier and power supply is SIL2 rated and provides galvanic isolation for the 4 to 20 mA measured signal. It is suitable for use in hazardous areas and can be powered by 20 to 250 VAC/DC, reducing the need for different versions across the plant.
The front-mounted HART communication sockets allow easy access to obtain information or reprogram the instrument without removing it or disconnecting the wires.
HART diagnosis can be selected with the DIP switch, allowing the user to: monitor the 4 to 20 mA signal for compliance with NAMUR NE43; evaluate the HART status byte to alarm when the connected device is in error mode; and check the Endress+Hauser (E+H) diagnostic command, for early warning of changed process conditions with E+H devices.
Easy to install, the device features a 22.5 mm width and compact DIN rail mount.
The power supply is offered with an IEC Ex ia rating, making it suitable for use in hazardous areas or for intrinsically safe solutions.
Phone: 1300 363 707
Emerson Rosemount 925FGD Gas Detector
The Emerson Rosemount 925FGD Gas Detector is the first Rosemount designed and engineered point...
HEMCO AirFlow monitor
The HEMCO AirFlow monitor is designed to continuously monitor the face velocity air flow of fume...
Honeywell Li-Ion Tamer gas detection system
Honeywell has deployed its Li-Ion Tamer gas detection system to improve the safety of lithium-ion...
