IoT for WHS mining applications could be on the rise

Inmarsat Ltd

By Safety Solutions Staff
Tuesday, 03 October, 2017


Dollarphotoclub 94688471 iconimage

In May 2017, market research specialist Vanson Bourne interviewed respondents from 100 large mining companies across the globe for Inmarsat’s ‘The Future of IoT in Enterprise-2017’ report. It found that, despite low current levels of IoT deployment in the mining industry, 40% of organisations have plans to deploy IoT solutions within the next 18 months. Health and safety emerged as the area in which mining respondents expect to see the most benefits from these deployments, with almost half (44%) expecting IoT to drive improvements to the health and safety of staff.

Improving health and safety also emerged as a key driver for IoT deployment, with 43% ranking it as a primary objective for their IoT strategy, just behind monitoring environmental changes (47%) and improving cost-effectiveness (44%).

Inmarsat Enterprise Director of Mining Joe Carr said: “The mining sector has worked over many years towards an industry-wide commitment of zero harm. Mines are a uniquely specialised, hazardous environment and as such miners are highly focused on employee safety. IoT solutions can play a significant role by remotely monitoring conditions and gathering data to anticipate and react to potential safety threats.

“Automation and connected wearable technology represent two of the single best opportunities to address the dangers of the mining environment.

“IoT technology provides the digital nerve system for a network of automated devices and sensors that adjust to environmental conditions in real time, meaning that equipment can react to potentially hazardous physical changes on-site rapidly without the need for human intervention, removing staff from potentially dangerous environments.”

There are also significant benefits to be gained in wearable technology as a solution for ensuring staff health and safety. Wearable sensors can monitor and analyse a wide range of  parameters, including sensing for dangerous gases or impact, raising the alarm if staff tracking is outside of acceptable parameters and monitoring worker locations to ensure they don’t enter hazardous areas of the site accidentally.

Carr concluded: “Inmarsat is committed to helping the industry achieve zero harm: our founding principle was one of safety and life saving, and this heritage is present in everything we do today. Using IoT to reduce fatalities and improve health and safety is only going to be possible if the connectivity provided by satellite technologies to move and analyse data is in place. The big challenge for mines is that they are often situated in some of the most remote parts of the world, away from cellular and terrestrial networks in an ever-changing environment.

“Satellite communications not only offer better coverage and more reliable communication networks, crucial in the event of extreme weather or an emergency, but can provide connectivity in deep, open-pit mines and even underground, using repeaters. With up to 99.9% uptime, Inmarsat’s L-band services are enabling IoT solutions in mines globally, even in the most remote and hostile environments.

Image credit: ©iconimage/Dollar Photo Club

Related Articles

IoT for WHS mining applications could be on the rise

40% of mining organisations have plans to deploy IoT solutions within the next 18 months, with...

October is National Safe Work Month

Diane Smith-Gander, Safe Work Australia Chair and non-executive director of AGL Energy and...

Energise your safety culture

As we think about strategies to energise your safety culture, you are encouraged to think a bit...


  • All content Copyright © 2017 Westwick-Farrow Pty Ltd