Handling

Article (2)
  • Survey identifies high risk of exposure to airborne hazards
    A Safe Work Australia survey has found that a high percentage of workers in Australia are exposed to airborne hazards.
  • How safe are nanotechnologies?
    Cost-benefit analysis is a challenging element of safety management because managers can choose between adequate safety and possible benefits from production with a lower level of safety. OHS law in most states allows for an almost formal assessment in managing a hazard or risk ‘as far as is reasonably practicable’. But what if that hazard is unknown? Does that mean that a cost-benefit analysis is easy because the cost cannot be determined?
Feature (10)
  • Nano: the new science with lots of unanswered questions
    Greater transparency and public engagement about the potential opportunities and risks presented by nanotechnology is required, according to a new report by The Australia Institute.
  • The cost of not knowing your legal obligations when working with asbestos
    Workplace Health and Safety Queensland provides some sound advice in properly dealing with asbestos in the workplace.
  • Using lasers to detect hazardous waste
    Recent developments in laser technology may provide a new means to safely test materials for hazardous substances.
  • Equipment calibration in hazardous locations
    Accurate instrument calibration is vital in hazardous environments, where the build-up of dangerous substances could lead to disastrous results. Equipment requirements vary according to the materials present, so what are some solutions?
  • Safety concerns over nanoparticles
    Quantum dot nanoparticles can penetrate the skin if there is an abrasion, highlighting concerns for healthcare workers or individuals involved in the manufacturing of quantum dots or doing research on potential biomedical applications of the nanoparticles.
  • How anti-terrorism laws are increasing executive liability
    Changes to the social and political landscape since the 11 September 2001 terrorism attacks have brought far-reaching changes in OHS laws and increased accountability and liability on C-level executives.
  • Working with asbestos
    The Asbestos Disease Society of Victoria believes that almost everyone has been exposed to some asbestos fibre at some point, but for most the risk is very small. Reassuring words, but why does the mere mention of asbestos send a shiver down the spine?
  • Working with wood and its derivatives
    Recently, Safety Solutions magazine spoke at length to Dr Alan Halligan, from the Australian Wood and Paperboard Association, about the real and perceived dangers about the dust generation. Following is an abbreviated transcript of that interview
  • Australia set to align with EU chemical standards
    In Australia today, there is no national approach to the management and control of workplace hazardous chemicals. Codes and practices are governed by each state and territory, which makes it difficult to impose national OH&S regulations
  • Silo safety: Australian or imported?
    A high-profile incident in a Cootamundra silo has highlighted the many dangers associated with working on or around silos
Product (43)
  • Fluid Components ST75 ATEX- and IECEx-approved flowmeter
    The Fluid Components ST75 flowmeter is now ATEX and IECEx approved for safety in hazardous and potentially explosive plant environments.
  • Stahl 6149 Toughlux handlamp series
    The 6149 Toughlux series of handlamps has been added to the range of Stahl IEC ex hazardous area equipment (HAE).
  • Spill Station self-contained emergency tank showers
    Spill Station’s self-contained emergency tank showers provide a solution where mains water supply is not available.
  • Bio-Circle range of bioremedial parts cleaners
    The Bio-Circle range of bioremedial parts cleaners can clean oily, greasy, dirty machine components without the use of hydrocarbon-based solvents, presenting a safer and more comfortable cleaning process than solvent cleaners.
  • Ramex retractable, manual- and motor-rewind hose reels
    The Ramex range of retractable, manual-rewind and motor-rewind reels is available in standard AISI 304 stainless steel, powder-coated steel or, where higher standards of hygiene and chemical resistance are required, in AISI 316 stainless steel and are suitable for any worksite.
  • Turck Interface and Intrinsic Safety Quick Reference Guide
    The Turck Interface and Intrinsic Safety Quick Reference Guide provides an overview of the company’s intrinsically safe products, including switching amplifiers, analog I/O, solenoid drivers, rotational speed monitors and relay and power supplies.
  • AMS Instrumentation HygroPro intrinsically safe moisture transmitter
    HygroPro is a loop-powered, intrinsically safe moisture transmitter for measuring the moisture content in gases and non-aqueous liquids in pipeline natural gas, petrochemical, power generation, pharmaceutical, process and industrial applications.
  • Macquarie Industrial Solutions BioSpray D2 Surface Sanitiser and Disinfectant
    Macquarie Industrial Solutions' BioSpray D2 Surface Sanitiser and Disinfectant kills 99.999% of viruses and bacteria and is said to save 55-68% on labour costs as it uses 60-88% less product. It is non-corrosive, non-flammable and no rinse.
  • TODO dry break systems
    TODO, said to be a world leader in the manufacture of dry break fluid transfer systems with over 30 years' experience, now has a new Australian distributor, Integrated Transfer Solutions.
  • Washdown gun
    Instant visual identification of high-temperature water outlets is possible using the brightly coloured, red version of the Ergonomic Washdown Gun.
  • Drum dispensing tool
    The Poly-Dolly drum carrier transports 205 L drums and tilts to become a self-dispensing station, while acting as its own secondary containment unit against spills.
  • Safety tools
    The EgaMaster 1000 V insulated tools are tested to 10,000 V and tested for heat resistance, adhesion, penetration and impact, making them suitable for a wide range of trades and applications.
  • Safe blade disposal
    The Safebox 108000 is designed for safe deposition of used snap-off blade segments. It is inaccessible to fingers so used blades are prevented from causing injuries once deposited.
  • Protruding bar caps
    Life Guard Caps provide impalement protection from the exposed ends of reinforcing bars, bolts, pegs, stakes, star pickets and other projecting hazards in the workplace.
  • Oil-in-water monitor
    The OIW-EX series of oil-in-water monitors is designed to operate in hazardous environments and provide consistent, accurate and uninterrupted measurements. The product features self-cleaning capabilities that greatly minimise maintenance.
  • Opacity monitor
    The DynOptic Systems SM-202 opacity monitor is a dust particle and smoke monitoring system designed for use in industrial applications.
  • Hazardous area scales
    Powercell MTX is a hermetically sealed IP68-/IP69K-rated digital load cell used for vehicle-scale applications that can also be safely deployed in hazardous environments such as transportation of flammable and explosive materials.
  • Garbage compressor
    The Block is a 1000 kg concrete block that is used by a forklift to compress rubbish on the ground or in a bin, cutting rubbish pick-up costs by improving waste compacting and management.
  • Safety air gun
    The Silvent 755-L Safety Air Gun is claimed to reduce noise by up to 73% and air usage by up to 49% over an open pipe at 10 mm diameter.
  • Thermography guide
    Flir has published a free 28-page guide to IR thermography for both experienced and novice users of the technology.
  • Thermal imaging cameras
    Flir Systems has released three i-Series thermal imaging cameras — the i40, i50 and i60.
  • Cleaner, safer, live-fire extinguisher training
    Provide clean, safe and effective extinguisher training without the need for dry-chemical or CO2 extinguishers.
  • Industrial dust monitor
    The DynOptic Systems DSL-1000 opacity monitor is a dust particle and smoke monitoring system designed for use in industrial applications such as combustion processors, power stations, industrial boilers, furnaces, cement works, tunnels and underground car parks.
  • On-site safety training
    The 'Dräger Personnel Occupational Development trainer' (D-pod) is designed to permit on-site delivery of the required occupational training modules associated with workplace safety training. Training is delivered in line with nationally recognised and risk-assessed training courses that are designed to improve awareness and safety of specific occupational hazards.
  • Hose holder
    The CT-SG hose holder is for all CT mobile dust extractors. It enables tidiness and cleanliness in the workshop at the customer's premises and during transportation.
  • Dangerous goods storage solutions
    The recent introduction of AS1940/2004 for the storage of dangerous goods has meant that organisations storing any flammable, poisonous or hazardous goods in the workplace must now comply to strict new guidelines.
  • Dust containment system
    A dust containment system has been designed to maintain OHS standards for employees in the pharmaceutical and tablet making industry.
  • Food grade dust collector
    The Dalamatic DU453/K11 reverse pulse jet cleaning system dust collector has a 7.5 KW fan and can achieve an extraction rate of 3500 m3/h.
  • Ucrete DP flooring technology
    Ucrete DP utilises unique heavy-duty polyurethane resin technology that combines extreme floor durability with a non-slip finish.
  • Pipe fittings
    Philmac has released a range of pipe fittings with improved durability and unique safety features, specifically for the mining industry.
  • Cartridge filters
    The Ultra-Web cartridge filters claim to create cleaner, safer air for workers, longer filter life and greater cost savings.
  • Fume, dust and smoke filter
    Two workplace safety technologies for fume collection have been re-released, to extract welding fume, smoke, and grinding dust from workers’ breathing zone.
  • Hydrocarbon-resistant tubing
    VerderFuel tubing is specifically designed to offer resistance against embrittlement, cracking and swelling of the tube caused by hydrocarbon-based fluids.
  • Asbestos removal supervisors' course
    TAFE NSW has developed a WorkCover NSW recognised four-hour program Bonded Asbestos - Nominated Supervisors Course for people who supervise teams in the bonded asbestos removal areas.
  • Ventilation system
    Without monitoring, it is not possible to determine if a shipping container is safe to enter. Regulations, such as those of WorkSafe Victoria, have guidelines requiring 24 hour open-door ventilation. Similarly, the Australian Standard Fumigation Procedures require at least six hours' ventilation of containers after fumigation.
  • Dust collectors
    Keeping things clean and saving you money - Donaldson's new Modular Baghouse dust collectors offer the perfect solution for cleaning up the industrial work environment.
  • Portable weld fume, dust and smoke filter for workplaces
    Donaldson Australasia has re-released two workplace safety technologies for fume collection to effectively extract welding fume, smoke and grinding dust from a worker's breathing zone.
  • Power Towels/Hand cleaner wipes
    Power Towels are available in two varieties. One is a white single textured towel, the other a purple dual-textured towel. Carefully selected dermatologically-safe ingredients are blended with six conditioners to moisturise and protect your skin.
  • Non-toxic roof flashing
    Wakaflex is a non-lead, flexible, non-toxic and lightweight replacement for all abutments and rising roof structures where lead would have traditionally been used.
  • Hygienic towel dispenser
    The high-tech Hygiene towel dispenser is a non-chemical-based system that provides users with sanitised handtowels. It can be used in a wide variety of commercial and industrial applications including food production and preparation, health care, pharmaceutical and manufacturing facilities.
  • Halogen-free pipe system
    CalAir Pipe Systems has formulated a halogen-free, flame-retardant version of its pipe systems. It retains all the established advantages of polymers — including good flexibility — but doesn’t lose its strength or pressure capabilities under demanding operational conditions.
  • Dust collectors
    Keeping things clean and saving you money - Donaldson's new Modular Baghouse dust collectors offer the perfect solution for cleaning up the industrial work environment.
  • Insect light traps
    A range of insect light traps has been designed to trap insects rather than 'zap' them to avoid contamination and cross-infection risks through insect fallout and airborne particles produced by high-voltage electrocution.
News (88)
Case Study (3)
  • Fast extraction system slashes cleaning duties for powder coater
    A powder coating facility on the Gold Coast has completely upgraded its dust handling system to optimise occupational health and safety standards for employees, plus gain a system that is largely self-cleaning
  • Safeguarding a new OPAL reactor
    A $350 million OPAL reactor is soon to produce neutrons for eight neutron beam instruments (NBI) that will enable scientists to investigate the atomic structure of new materials, chemical reaction kinetics and biological processes
  • Fire and gas safety system for refinery
    A Yokogawa ProSafe-RS safety instrumented system (SIS) will be the nucleus of a new fire and gas safety system at Shell's Clyde (NSW) refinery. The contract includes the control system, system engineering and installation and supervision
© 2010 Westwick-Farrow Pty Ltd. All Rights Reserved. Designated trademarks and brands are the property of their respective owners. Use of this website constitutes acceptance of our Terms and Conditions and Privacy Policy.

Get your FREE membership today - CLICK HERE  |  Log-in