Gas detection

Article (1)
  • Just owning the safety equipment is not enough to save you
    People are injured and killed when working in confined spaces, despite all of the warning, detection and protection equipment available. Safety regulators all around the world can accurately pinpoint how people are injured or die and the most common environments in which injuries and deaths occur. So with all those statistics about working in confined spaces and control measures, why do injuries and deaths still occur?
Product (57)
  • CAC Gas non-refillable calibration gas cylinder recycling program
    The CAC Gas recycling program for empty non-refillable calibration gas cylinders allows all 34, 58, 103 and 112 L cylinders to be recycled.
  • Panametrics DF-140E oxygen analyser
    The Panametrics DF-140E oxygen analyser is designed to provide dependable and accurate oxygen measurements in a wide variety of environments, including outdoors (with Type 4X enclosure) and in explosive environments (with Type 7 remote-sensor enclosure).
  • Sperian Protection Australia Biosystems IQ6 docking station
    The Biosystems IQ6 docking station is fully automated to perform bump tests and calibration, if necessary, of Biosystems PhD6 gas detectors.
  • Infrared cameras
    The second generation of GF-Series infrared cameras, previously known as GasFindIR has been released.
  • Gas detection docking station
    Compatible with the Biosystems Multi Pro range of gas detection units, the Multi Pro IQ Express Docking Station is fully automated and features automatic instrument identification.
  • CAC Gas & Instrumentation gas manifolds
    The CAC Gas & Instrumentation gas manifolds and changeover systems provide an engineered solution for gas calibration applications.
  • Hazardous gas monitor
    The OdaLog H2S Logger was developed specifically to measure concentration levels of hazardous hydrogen sulphide gas (H2S) for the odour-management requirements of the wastewater industry, primarily at or close to the source of H2S emissions, such as within sewerage pumping stations and receiving manholes.
  • Gas detector
    The MX4 gas detector is small, rugged and simple to use. It’s a suitable personal monitor to use in conjunction with the iNet program.
  • Docking stations for gas analysers
    The Biosystems Toxi Pro/Toxi Ltd IQ Express docking stations are compatible with the Toxi Ltd and the Toxi Pro gas analysers respectively.
  • Thermal imaging camera
    The GasFindIR LW camera is capable of imaging ‘fugitive’ greenhouse gases such as SF6 and NH3. The camera’s rapid scanning capabilities provide real-time thermal images of gas leaks.
  • Intrinsically safe power supply
    The RN221N combined active barrier and power supply is SIL2 rated and provides galvanic isolation for the 4 to 20 mA measured signal. It is suitable for use in hazardous areas and can be powered by 20 to 250 VAC/DC, reducing the need for different versions across the plant.
  • Multigas detector
    The GasAlertMicro 5 PID can simultaneously monitor and display up to five potential atmospheric hazards.
  • Multigas detector
    The Biosystems PHD6 multigas detector features: five sensor ports; up to six channels of detection; and 18 sensor options, including electrochemical, LEL, PID and infrared sensors.
  • Multi gas detector
    Featuring 5 sensor ports, up to 6 channels of detection and 18 sensor options including electrochemical, LEL, PID and Infrared, the PHD6 is suitable for just about any type of gas monitoring situation.
  • Open path gas analyser
    LI-COR’s LI-7500 high-speed, high-precision Open Path CO2/H2O infrared gas analyser accurately measures absolute densities of carbon dioxide and water vapour in turbulent air.
  • Adjustable calibration gas regulator
    The Dial-a-Flow regulator provides technicians with one regulator that has seven different flow settings ranging from 0.3 to 3 L/min or 0.5 to 5 L/min.
  • Emissions analyser
    The Enerac 500 EMS is a micro-emissions monitoring system that uses large electrode-area, filtered electro-chemical sensors. It is easy to use and scans for NO, NO2, SO2, CO and O2.
  • Ambient air analyser
    The MIRan SapphIRe series of ambient air analysers uses infrared spectroscopy to specifically and accurately.
  • CO monitor
    The DSL-7000 is a combined carbon monoxide and opacity monitor for continuous in situ emissions measurements.
  • Ambient air analyser
    The MIRan SapphIRe series of ambient air analysers uses infrared spectroscopy to specifically and accurately measure many gases with a single unit.
  • Multi-gas detector
    GasAlertMicro is a compact, durable multi-gas detector suited to a wide range of applications including HAZMAT response, confined space entry and post-inspection fire safety.
  • Multiple gas monitors
    The X-am 2000 is a four-gas detector that reliably measures explosive gases and vapours, as well as O2, CO and H2S. It is suitable for confined space use and comes in a special case with charger, electronic pump and tubing.
  • Calibration gases
    Calibration gases are now available in a 112 L cylinder, providing users with nearly twice the gas volume they have been used to with previous cylinders, but without an increase in the physical cylinder size.
  • CO2 monitor
    The D-TEK CO2 gas monitor uses an infrared absorption-sensing cell which is highly selective to carbon dioxide, combined with circuitry that allows the instrument to equalise to the CO2 present in the atmosphere to minimise the risk of false alarms.
  • Gas monitor
    The iTX Multi-Gas Monitor is a portable gas detection instrument designed to grow as the user’s monitoring needs change. The iTX can go from being a single gas unit to a six-gas monitor, with simple user configurations and sensor changes.
  • Gas and radiation detection
    The AreaRAE Rapid Deployment Kit is a wireless toxic gas and radiation detection system designed to interface with existing AreaRAE systems.
  • Gas chromatograph
    The Micro gas chromatograph rapidly determines the calorific value of natural gas. The device is suitable for custody transfer of natural gas, such as pipeline monitoring, gas transfer and distribution stations, gas liquefaction and regasification of LNG terminals.
  • Gas analyser
    The Sitrans SL diode laser gas analyser features an inline reference cell filled with a non-interfering reference gas, providing a non-contact measurement of gas concentrations in process or flue gases.
  • Single gas monitor
    GasBadge Plus is a maintenance-free, single gas monitor with a two-year lifespan, designed for personal protection from unsafe levels of carbon monoxide, hydrogen sulfide, oxygen, nitrogen dioxide or sulfur dioxide.
  • Multigas detector
    The Biosystems PHD6 multigas detector features: five sensor ports; up to six channels of detection; and 18 sensor options, including electrochemical, LEL, PID and infrared sensors.
  • Calibration gases in bulk quantities
    Calibration gases are now available from CAC GAS in 750, 1500, 3000 and 7500 L capacity.
  • Corrosive gas calibrator
    The CAL 2000 is a microprocessor-controlled gas generator designed for corrosive gas calibration.
  • Safe field calibration
    The ATEX and IECEx certified Beamex MC2-IS Intrinsically Safe Multifunction Calibrator is a practical tool designed for field calibration and testing in explosive environments.
  • Hydrogen sulfide monitor
    The T40 Rattler is a single gas monitor designed to protect personnel from dangerous hydrogen sulfide gas exposure in extreme conditions. The unit is suitable for applications in such diverse climates as the desert or the arctic.
  • Air quality monitoring and information recording instrument
    YESair is a sophisticated, multi-sensor air quality monitoring and information recording instrument which simultaneously measures and records temperature, relative humidity and CO2 levels.
  • Toxic gas sensors
    The Bionics toxic gas sensors are available for the detection of a wide range of toxic, corrosive and flammable gases. The detectors are housed in IP65-rated cases, allowing installation in both outdoors and harsh environments.
  • Portable monitor/data logger
    The personalDataRAM (pDR-1000AN) measures mass concentrations of dust, smoke, mists and fumes in real time.
  • Vehicle emergency respiration systems
    The Mine Vehicle Breathing Air (MVBA) systems are designed and installed in vehicle cabins where entrapment or irrespirable atmospheres are a potential hazard.
  • Confined space system and tags
    Scafftag's Entrytag is a tag which helps identify hazards and details necessary precautions which need be taken before entering an enclosed area. An Entrytag at the point of entry to the confined space clearly displays the minimum requirements before entry and the latest status of the area. The user-friendly and weather-resistant tag is a complete confined space status tagging system. It helps prevent accidents and efficiently manage inspection procedures. The tags can be customised according to requirements including inspection data displayed and branding. Magnetic tags are also available.
  • BW Technologies by Honeywell GasAlertMicroClip confined space gas detector
    BW Technologies by Honeywell has introduced the GasAlertMicroClip, a compact multi-sensor confined space gas detector.
  • Portable multi-gas monitor
    The Scout is a tough and simple-to-use multi-gas monitor that measures and displays toxic gases, oxygen and combustible gas concentrations simultaneously. These measurements are possible through selection from a wide range of interchangeable (plug-and-play) smart sensors.
  • Gas monitor
    Industrial Scientific Corporation has enhanced its full-featured, dockable GasBadge Pro single gas monitor by introducing an electrochemical hydrogen sensor option.
  • Intrinsically safe toxic vapour analyser
    The TVA1000B is an over-the-shoulder portable vapour analyser that offers both PID (photo ionisation detection) and FID (flame ionisation detection) in a single, easy-to-use instrument.
  • Confined space gas detector
    BW Technologies is one of the world's largest makers of gas-detection equipment. Headquartered in Calgary, Canada, the Company's products range from disposable, zero-maintenance personal H2S detectors, to fixed gas detection systems, to the GasAlertMicroClip, the Company's latest multi-sensor confined space gas detector.
  • Sulfur hexafluoride detector
    The Austech SF6 leak detector is an extractive gas sampling system designed for the continuous detection and monitoring of sulfur hexafluoride (SF6) gas leaks. The product houses an in-built gas sensor which is designed to enhance the detection sensitivity of SF6.
  • Multi-gas detector
    The GasAlertMicro 5 PID for multi-gas detection provides simultaneous monitoring of up to five gases including oxygen, combustible gases, a range of toxic gases and volatile organic compounds. The lightweight, compact and water-resistant unit is suitable for a wide range of applications, including hazmat response, confined space entry, search and rescue, and post-inspection fire safety.
  • Methane analyser for engines
    Austech Instruments has custom designed a methane analyser for monitoring the concentration of methane fed to engine modules, particularly those installed in power stations supplied by landfill waste gas or coal seam methane.
  • Confined space gas detector
    BW Technologies has introduced the revolutionary GasAlertMicroClip, the world's most compact multi-sensor confined space gas detector.
  • Underground safety communication technology
    Sydney company Tiller + Tiller has developed an underground communications technology for the mining industry. The technology is for use on the integrated communications cap lamp (ICCL), which is a lightweight cap lamp developed to incorporate a range of communications and safety technologies.
  • Personal gas monitor
    The 'dockable' GasBadge Pro single gas monitor is now available with a low hydrogen (H2) interference carbon monoxide (CO) sensor option.
  • Compact gas detector
    The GasAlertMicroClip is a compact multi-sensor confined space gas detector. It offers full-function multi-gas instrument performance with the simplicity, compact size and ease of use of a disposable gas detector.
  • Hydrogen cyanide sensor
    Industrial Scientific has enhanced its dockable GasBadge Pro single gas monitor with the introduction of a hydrogen cyanide (HCN) sensor option.
  • Multi-gas monitor
    The MX6 iBrid is a full-featured multi-gas monitor.
  • Fixed-point gas monitor
    The steel iTran is a robust solution for fixed-point gas detection. Built with a 316-grade stainless steel housing to withstand corrosion, the monitor is suitable for installations in harsh environments such as offshore drilling platforms, chemical plants or applications near a saltwater coastline.
  • Beam-type smoke detector
    The Fireray 5000 from Firefighting Enterprises has been certified as compliant with EN54:12, CPD (Centre for Policy Development) and LPCB (Loss Prevention Certification Board) standards. The F5000 beam-type smoke detector incorporates the Easifit first fix system and a visual Laser alignment aid to ease installation. Once fitted, an automated, motorised beam optimisation process ensures that the infrared beam is always adjusted for maximum efficiency and functionality.
  • MX6 iBrid Multi-Gas Monitor
    The MX6 iBrid is the new full featured multi-gas monitor from Industrial Scientific. The user-friendly design of the unit features a full-color liquid crystal display and 5-way navigation button to scroll through the menu-based operating system.
  • Confined space gas detector
    BW Technologies by Honeywell introduces the revolutionary GasAlertMicroClip, the world's most compact multi-sensor confined space gas detector. The GasAlertMicroClip offers full-function multi-gas instrument performance, with the simplicity, compact size and ease of use of a disposable gas detector. The small size, long life and high specificity of the sensors are central to the sleek, compact and functional design.
News (2)
Case Study (1)
  • Mitigating the risk of explosions in metallurgical furnaces
    The Siemens LDS6 laser gas analyser is helping to improve safety and save millions of dollars in damage repairs for the Tasmanian Electro Metallurgical company (TEMCO), a subsidiary of BHP Billiton that is located in Tasmania. It does this by alerting workers at the manganese ferro-alloy plant of an imminent furnace explosion and giving them sufficient time to prevent it.
© 2010 Westwick-Farrow Pty Ltd. All Rights Reserved. Designated trademarks and brands are the property of their respective owners. Use of this website constitutes acceptance of our Terms and Conditions and Privacy Policy.

Get your FREE membership today - CLICK HERE  |  Log-in