Height > Work platforms

Crown Wave 60 Series Work Assist Vehicle elevated platform

28 June, 2016

The Crown Wave 60 Series Work Assist Vehicle features an AC drive motor that enables the elevated platform to travel at speeds up to 8 km/h and offer increased manoeuvrability in warehousing and other industrial environments.


Companies fined $1.5m for worker's death in rig collapse

05 April, 2016

Two companies have been fined a total of $1.5 million over the death of a worker who fell 40 metres when a piling rig collapsed at a Melbourne construction site in 2011.


Ladamax PS15/12 aluminium platform step (3.45 m platform)

29 July, 2014

The Ladamax PS15/12 aluminium platform step has a working platform at 3.45 m with a working reach height of 5.4 m.


JLG Liftpod portable powered lift platform

25 July, 2014

The JLG Liftpod portable powered lift platform is suitable for working at heights up to 4.3 m.


Sayfa Systems Raptor Groove rigid rail system used for atrium maintenance

18 November, 2013

The architectural design of the Sydney-based 8 Chifley Square mixed-use, multilevel, commercial development includes magnificent glass atriums at multiple levels. While the beautiful design provides the building with natural light and warmth, maintenance was a problem. The Raptor Groove rigid rail system is designed for work positioning and suited all the requirements of this unique architectural structure.


Tech Innovations Australia TechTable

26 March, 2013

The TechTable from Tech Innovations Australia is a technicians table which has been designed specifically for the telecommunications industry to reduce common manual-handling risks, neck pain, shoulder pain and lower-back pain that occur while repetitively terminating data cabling.


Bravi Caddy and Spin-Go electric work platforms

13 March, 2012

Bravi Platforms has released the Caddy and Spin-Go electric work platforms.


Rocka Devices Klinch tool tethers

03 February, 2012

Klinch tool tethers are a fast and efficient tool lanyard system allowing users to safely and securely carry and use tools at heights, in confined spaces and over/under water. It provides the flexibility of using multiple tools and the ability to switch the tools between hands and dock them; all the while ensuring the tools are safely connected to the user or their work platform.


All Poly Products lead safe stand

01 August, 2011 by

The lead safe stand is a two-piece unit for ease of transport and storage. It has a bell-shaped base for stability, holds 45 kg of water/sand as ballast with a 50 mm fill and drain point. The tapered pole fits snugly into a base for quick assembly.


Property developer and director fined after fatal scaffolding fall

23 March, 2011

A NSW property development company and its director were fined and convicted after a worker fell to his death from scaffolding at a construction site.


Haulotte Compact 14 electric scissor lift

24 February, 2011 by

The Compact 14 is an electric scissor lift designed for indoor use in applications such as warehousing. It has a working height of up to 13.8 m and platform height of up to 11.8 m, and can be driven at full height to move to work areas.


Company fined over owner’s fall injuries

22 February, 2011

An Adelaide company was fined over an injury sustained by its managing director while he supervised construction works.


Fall injuries prompt reminder on safe work at heights

09 February, 2011

WorkSafe WA is urging employers with workplaces that may contain fall hazards to ensure their workplaces are safe from fall injuries.


WorkCover investigating construction site fall in Sydney

24 January, 2011

WorkCover NSW is investigating an incident at a construction site where a worker was seriously injured after falling five floors off scaffolding.


Access Safety Services Transport Access System

28 September, 2010 by

The Transport Access System allows safe and efficient access to many vehicles used in road and rail sectors.


  • All content Copyright © 2024 Westwick-Farrow Pty Ltd