E-connect is the plug-and-work way to connect traditional e-stop devices and safety relay modules. E-connect DeviceNet stations operate in the background to monitor where the stop was initiated and annunciate the system status.
The stations can be used on any DeviceNet system. They function alongside other DeviceNet I/O.
Stations are available to connectorise 1, 2 and 8 e-stop devices. In addition to the stations is a complete line of cabling products in bright red to make safety-wiring stand out.
E-connect DeviceNet stations do not impact the safety of the system. They are specifically designed to isolate the safety circuits from the auxiliary power and DeviceNet communications circuits. There is no technology learning curve, no special PLC, and no programming certification required. E-stops can be initiated even while the bus or PLC is down. Conversely, motion devices such as drives, steppers and servos are not abruptly powered-off just because the bus or the PLC stops functioning.
Phone: 02 4223 7600
Capital Safety Rollgliss Rope-Safe Rope Grab secondary back-up device for fall arrest
Designed for use as a secondary back-up device for fall arrest on kernmantle rope, the Rope-Safe...
Technique Solutions Python Quick Wrap tape and D-Rings attachment points
The Python D-Ring attachment points are used together with Python Quick Wrap tape and Heat Shrink...
Exair NEMA 12 cabinet cooler systems
The Exair small NEMA 12 cabinet cooler systems keep electrical enclosures cool with -7°C air...
