Ballantyne Safety Tether Plate travel restraint and fall arrest device

Tuesday, 11 October, 2011 | Supplied by: Ballantyne Safety


Ballantyne safety tether plate

The Tether Plate is a travel restraint and fall arrest device that can be used on metal-clad roofs. It can be used as a stand-alone diversionary roof anchor or it can be used in conjunction with the T-bar roof anchor. This device gives the operator the advantage of a 360° working area on the roof surface with continuous travel restraint protection.

The tether plate is a diversionary anchor point used for travel restraint application. It can be used on metal-clad roofs fixing directly to the metal surface with a minimum of four AS NZ1891.4 recommended roof screws. It can also be used on trim-deck roofs.

The device should only be used by those who have completed a roof safety training course that is RTO accredited. A full understanding of the Act, regulations and advisory standards is essential.

Online: www.ballantynesafety.com.au
Phone: 07 3357 9503
Related Products

HighStep modular climbing solution

The Swiss-engineered HighStep is a modular climbing solution designed for challenging...

3M Protecta PRO Fall Protection Full-Body Harness range

Capital Safety has released a redesigned and upgraded 3M Protecta PRO Full-Body Harness Range for...

Crown Wave 60 Series Work Assist Vehicle elevated platform

The Crown Wave 60 Series Work Assist Vehicle features an AC drive motor that enables the elevated...


  • All content Copyright © 2016 Westwick-Farrow Pty Ltd